The RZR® RS1™ Bluetooth® Integrated 200 Watt Waterproof Audio System including component speakers and external amplifier controlled by a switch mounted joystick Bluetooth controller with full installation harness and Polaris Pulse™ connector.
Polaris RZR RS1
|All-in-One Bluetooth Standards
CSR BT4.0 chipset, Version 4.0
|All-in-One Amplifier Power (watts)
|All-in-One Frequency Response
|All-in-One Bluetooth Range (ft)
|All-in-One Pre-amp Output
2 JST, 3.5V
|[Switch] BACKLIT: Dial is backlit, SWITCH HOLE: 0.83" x 1.41", [Amplifier] POWER RMS: 2 x 100 Watt, FREQUENCY RESPONSE (AUX IN): 20Hz-20kHz, TURN-ON: 2 "Turn On" Wires, CROSSOVER SLOPE: 12db/octave, SIGNAL TO NOISE: > 100dB, AMPLIFIER FREQUENCY RESPONSE: 10Hz-300Hz, [Speakers] SPEAKER SYSTEM POWER HANDLING (PEAK): 300 Watt, SPEAKER SYSTEM POWER HANDLING (RMS): 200 Watt, IMPEDANCE: 4 Ohm, SENSITIVITY (1 WATT / 1 METER): 89db, SPEAKERS SYSTEM FREQUENCY RESPONSE +/- 10DB: 55Hz-32kHz
|Proposition 65 Notice
|WARNING: This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
|Compatible Vehicle Fitment
SYSTEM INTEGRATION: Polaris and MB Quart Engineers work meticulously to ensure that your audio system integrates into your vehicle like it came that way from the factory. Nothing else fits Polaris like MB Quart OFF-ROAD GRADE AUDIO. Fits Polaris RZR RS1.
|Compatible Product Models
RIDE COMMAND compatible.
|Marine Grade Protection / IPX Rating
IPX67, LIFE SHIELD: Rest assured, when you see the MB Quart Life Shield icon, you are choosing a product that is Waterproof, Dust Proof, Snow Proof and built to the highest standards. After all, “out on the trails” is a tough place to work and play, but MB Quart is ready for whatever your Polaris can throw at it.
DESIGNED BY POLARIS & MB QUART: These audio systems are a collaboration between Polaris product development teams and MBQuart audio engineers and product designers.
The 200 Watt 2 channel amplifier for the RS1 Audio system is a high power amplifier that is designed specifically to augment the component speakers for the vehicle. When you need to play loud and sound incredible the amplifier is ready to crank. The MB Quart engineers have incorporated the Q-Stasis preamp stage which provides ultra-low noise through the single path. That low noise input is paired with our Class Q1 proprietary Full Range Class D Topology for a real sound quality powerhouse.
|Integrated Mid-Range Drivers
MIDRANGE/WOOFER: 5.25 inch midrange/woofer component. BUTYL RUBBER SURROUND - MIDRANGE: Flexible piston action UV protected rubber which will be impervious to temperature swings of very warm and very cold. MICA FILLED POLY CONE: Deep bass tones with musical midrange frequencies. VOICE COIL FORMER: Aluminum - Lightweight aluminum former which helps voice coil dissipate heat.
|Integrated Tweeter Drivers
TITANIUM DOME TWEETER WITH ALUMINUM VOICE COIL: 1 inch (29mm) Titanium dome delivers a superior sound quality over aluminum with a very smooth high frequency with the added benefit of additional output.
|Enclosure / Structure
ABS GASKET: Strong ABS plastic is used to seal the mounting between the speaker frame and the door panel. CROSSOVER DESIGN: External high-pass and low-pass design - Improved separation between tweeter and mid/woofer with 12dB per octave external crossover network improves heat and crosstalk between crossover network devices on the small internal PC board. The crossover also includes tweeter protection circuitry to protect against spikes.
|Secure Simple Pairing™
Secure Simple Pairing provides a quick and secure wireless connection between the speaker and device. This reliable connection is impervious to outside interference, providing a lock-tight connection to your speaker so you can enjoy your music uninterrupted!
BLUETOOTH® CONNECT: Bluetooth™ Connect allows your phone or other Bluetooth enabled device to be quickly paired to the controller without a complicated pairing process.
POLARIS PULSE™ READY & SYSTEM HARNESS: Polaris Pulse™ is a revolutionary way to provide power on your Polaris vehicle, and makes adding electrical accessories a snap. All components wire together without the need to cut any wires or buy additional harness. TINSEL LEADS SILICONE JACKET: Silicone jacketed, extra flexible leads for strength and durability.