DSP with built in 4 channel amplfier.
| Type | Amplifier |
|---|---|
| Brand | MB Quart |
| Series | International |
| Category | International, Mobile |
| Condition | New |
| Color | Black |
| Warranty | N/A |
| Amp Class | Class A/B |
| Amp Total Channels | 4 |
| Amp Max Power (watts) | 200 |
| Amp Power @ 2 Ohms (ch x watts) | 4 x 50 |
| Amp Power @ 4 Ohms (ch x watts) | 4 X 25 |
| Amp Crossover | Control by PC software |
| Amp Variable High Pass Crossover 12dB per Octave | Control by PC software |
| Amp Variable Low Pass Crossover 12dB per Octave | Control by PC software |
| Amp Tone Control / Parametric EQ | Control by PC software |
| Amp Bass Boost | Control by PC software |
| Amp Subsonic Filter | Control by PC software |
| Amp Phase Shift | Control by PC software |
| Amp Variable Voltage | Control by PC software |
| Amp Signal to Noise | > 90dB |
| Amp Frequency Response | 10Hz – 20KHz |
| Amp Total Harmonic Distortion (THD) | < 0.1% |
| Pre-amp Audio Outputs | RCA |
| Amp Power Terminal 12v/GND | 4 GA |
| Amp Speaker Terminal Wire Gauge | 12 GA |
| Amp Fusing | 40A X 3 |
| Low Noise Preamplifier Circuit | Adopt AKM multi DSP Technology AKM is a professional DSP ADC DAC chip developer and manufacturer. Its chips are widely used in high-end audio products and high-end mobile phone audio processing • High speed 24-BIT ADC DAC • 192K sampling frequency • high frequency sampling enables better reproduction of sound details • CSR 5.0 aptx Bluetooth • Qualcomm's proprietary high-definition Bluetooth transmission technology enables lossless transmission of audio to DSP • IOS / Android app allows a convenient and fast control of the DSP. |
|---|---|
| RCA Inputs | Nickel Plated: High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant. |
| High Level Inputs | DC SIGNAL SENSE: The DC SIGNAL SENSE switch will allow the amp to turn on when a signal is received on the RCA inputs, so an amplifier remote turn on wire is not needed to turn on the amplifier. This feature can also be turned off. |
| Operation Mode | 4 Channel operation |
| Crossover Type | Control by PC software |
| Electronic Equalizer | Control by PC software |
| Class / Topology | Class A/B |
| Output Device Technology | FLUID-FETS: MB Quart output devices, FLUID-FETS are painstakingly selected for their ability to efficiently produce power and mimic the sound quality of the highest end home amplifiers. |
| Heat Sink | Heavy duty heat-sink efficiently moves heat from the MOSFET where it can be cooled. |
| Power Supply | Direct use of vehicle power supply, increase of high-efficiency power filter isolation, make the power supply of power amplifier clean and undisturbed. |
| Output Connections | Heavy duty connections allow for secure electrical signal to pass into wiring and resist erosion which will add longevity to the amplifier. |
| Connection Type | Plug and play wiring |
| Full-Range RCA Outputs for Signal Pass Through | YES |
| LED System Protection Circuitry Diagnostics | Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel. |
| Bass Remote Included | N/A |
| Phase Adjustment | Control by PC software |
| Auto Turn-On | YES |
| Full Range Digital | YES |
| SMT Inside | YES |
| Additional Features | YES |
| Coming Soon | Product documentation and files are not yet available. |
|---|
Related products
-
M3-800.1 Amplifier
Temporarily sold out -
M1-360.4 Amplifier
Temporarily sold out -
M3-900.4 Amplifier
Temporarily sold out -
M5-4150 Amplifier
Temporarily sold out