Class H high fidelity 2 channel amplifier.
| Type | Amplifier |
|---|---|
| Brand | MB Quart |
| Series | International |
| Category | International, Mobile |
| Condition | New |
| Color | Silver |
| Warranty | N/A |
| Amp Class | Class SQ (Class H) |
| Amp Total Channels | 2 |
| Amp Max Power (watts) | 540 |
| Amp Power @ 2 Ohms (ch x watts) | 2 x 270 |
| Amp Power @ 4 Ohms (ch x watts) | 2 x 180 |
| Amp Crossover | Electronic |
| Amp Variable High Pass Crossover 12dB per Octave | CSwitched Full/HPF 20Hz-300Hz |
| Amp Variable Low Pass Crossover 12dB per Octave | CSwitched Full/LPF 30Hz-600Hz |
| Amp Variable Voltage | 0.3-8V |
| Amp Signal to Noise | > 93dB |
| Amp Frequency Response | 10Hz – 30KHz |
| Amp Total Harmonic Distortion (THD) | < 0.5% |
| Amp Speaker Level Audio Inputs | RCA Jack |
| Amp Power Terminal 12v/GND | 4 AWG |
| Amp Speaker Terminal Wire Gauge | 12 AWG |
| Amp Fusing | 40A |
| Low Noise Preamplifier Circuit | Q-Stasis Preamplifier Stage: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion. |
|---|---|
| RCA Inputs | Nickel Plated: High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant. |
| High Level Inputs | DC SIGNAL SENSE: The DC SIGNAL SENSE switch will allow the amp to turn on when a signal is received on the RCA inputs, so an amplifier remote turn on wire is not needed to turn on the amplifier. This feature can also be turned off. |
| Operation Mode | 2 Channel operation |
| Crossover Type | Variable electronic crossovers allow for complete control of the sound. |
| Electronic Equalizer | Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier. |
| Class / Topology | Innovative use of Class SQ (Class H) for full range. |
| Output Device Technology | FLUID-FETS: MB Quart output devices, FLUID-FETS are painstakingly selected for their ability to efficiently produce power and mimic the sound quality of the highest end home amplifiers. |
| Heat Sink | Heavy duty heat-sink efficiently moves heat from the MOSFET where it can be cooled. |
| Power Supply | Rugged MOSFET Pulse Width Modulation power supply: Allows amplifier to product efficient power without taxing the vehicle electrical system. |
| Output Connections | Heavy duty connections allow for secure electrical signal to pass into wiring and resist erosion which will add longevity to the amplifier. |
| Connection Type | Secure connection for all power, ground, and speaker connections. |
| Full-Range RCA Outputs for Signal Pass Through | N/A |
| LED System Protection Circuitry Diagnostics | Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel. |
| Bass Remote Included | N/A |
| Phase Adjustment | N/A |
| Auto Turn-On | N/A |
| Full Range Digital | N/A |
| SMT Inside | N/A |
| Additional Features | N/A |
| Coming Soon | Product documentation and files are not yet available. |
|---|
Related products
-
M3-1000.8 DSP Amplifier
Temporarily sold out -
MDSP Amplifier
Temporarily sold out -
M3-800.1 Amplifier
Temporarily sold out -
M1-360.4 Amplifier
Temporarily sold out