Compact Full range Class D 4 channel amplifier.
Class SQ (Class D)
|Amp Total Channels||
|Amp Max Power (watts)||
|Amp Power @ 2 Ohms (ch x watts)||
4 x 225
|Amp Power @ 4 Ohms (ch x watts)||
4 x 125
|Amp Variable High Pass Crossover 12dB per Octave||
CH1 & CH2: Switched Full/HPF 20Hz-220Hz, CH3 & CH4: Switched Full/HPF 20Hz-220Hz
|Amp Variable Low Pass Crossover 12dB per Octave||
CH1 & CH2: Switched, Full/LPF, 20Hz-220Hz, CH3 & CH4: Switched, Full/LPF, 20Hz-220Hz
|Amp Bass Boost||
|Amp Variable Voltage||
|Amp Signal to Noise||
|Amp Frequency Response||
10Hz – 22KHz
|Amp Total Harmonic Distortion (THD)||
|Amp Speaker Level Audio Inputs||
|Amp Power Terminal 12v/GND||
|Amp Speaker Terminal Wire Gauge||
|Low Noise Preamplifier Circuit|
Q-Stasis Preamplifier Stage: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion.
Nickel Plated: High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant.
|High Level Inputs|
DC SIGNAL SENSE: The DC SIGNAL SENSE switch will allow the amp to turn on when a signal is received on the RCA inputs, so an amplifier remote turn on wire is not needed to turn on the amplifier. This feature can also be turned off.
4 Channel operation
Variable electronic crossovers allow for complete control of the sound.
Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier.
|Class / Topology|
Innovative use of Class SQ (Class D) for full range.
|Output Device Technology|
FLUID-FETS: MB Quart output devices, FLUID-FETS are painstakingly selected for their ability to efficiently produce power and mimic the sound quality of the highest end home amplifiers.
Heavy duty heat-sink efficiently moves heat from the MOSFET where it can be cooled.
Rugged MOSFET Pulse Width Modulation power supply: Allows amplifier to product efficient power without taxing the vehicle electrical system.
Heavy duty connections allow for secure electrical signal to pass into wiring and resist erosion which will add longevity to the amplifier.
Secure connection for all power, ground, and speaker connections.
|Full-Range RCA Outputs for Signal Pass Through|
|LED System Protection Circuitry Diagnostics|
Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel.
|Full Range Digital|