« Previous »
Next
Overview
Part #: NA2-400.1 | SKU: 806576227359 | Category: NA2 Amplifiers
MB Quart compact 400 watt mono Powersports amplifier to for a subwoofer with on-board equalization and simple installation with quick release connectors.
MB Quart compact 400 watt mono Powersports amplifier to for a subwoofer with on-board equalization and simple installation with quick release connectors.
Specifications
Part #: NA2-400.1 | SKU: 806576227359 | Category: NA2 Amplifiers
- Class
Full Range Class D - Variable Voltage
0.2V~9V - Signal to Noise Ratio
>100dB - Frequency Response
10Hz-300Hz - Crossover Type
Electronic 12dB Per Octave - Crossover Frequency Range
CH1 & CH2
Switch Low Pass 300 Hz - Bass Boost
0-12dB@45Hz - Subsonic Filter
60Hz - Power @ 2-Ohms
1 x 400W - Power @ 4-Ohms
1 x 200W - Total Channels
Mono - Audio Inputs
RCA - Power Terminal 12v/GND
Molex 10 ga - Speaker Terminal Wire Gauge
Molex Plug Connector - Fusing
1 x 30 Amps - Certifications
Marine & Powersports - Dimensions
3.70 X 5.51 X 1.77 in
9.4 X 14.0 X 4.5 cm - Weight
2.09 lbs (0.95 kg)
System Includes
Part #: NA2-400.1 | SKU: 806576227359 | Category: NA2 Amplifiers
More info in development & coming soon!
More info in development & coming soon!
Features & Benefits
Part #: NA2-400.1 | SKU: 806576227359 | Category: NA2 Amplifiers
- Marine Grade Protection: YES Amplifiers are ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture.
- Pre-Amp Circuitry: Q-Stasis Pre Amplifier Stage The highly engineered Q-Stasis pre-amplifier stage reduces incoming noise from source units dramatically improving sound quality
- Inputs: 2 Pair, RCA Nickel-Plated High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
- Operation Mode:Mono operation Deisgned to power 1 subwoofer or subwoofer system
- Crossover / Signal Shaping: LPF Complete control of amplifier signal, essential when using two or more amplifiers
- Class / Topology: Full Range Class D Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.
- Output Devices Technology: PWM MOSFET Power Supply Stable power through the PC board with minimal heat generation
- Heat Sink: Aluminum Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration
- Power Supply: Simpatico Coil Design The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
- Output Connections: Quick Dissconect Wires, RCA Connections Quickly remove amplifer when you are putting machine up for the winter of as a security precaution
- Connections Type: Nickel-plated connections Nickel plated corrosion resistant connections
- Diagnostics: Three-stage protection circuits Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
- Marinized / Waterproof: YES Water resistant for durability in any environment
Technology
Part #: NA2-400.1 | SKU: 806576227359 | Category: NA2 Amplifiers
More info in development & coming soon!
More info in development & coming soon!