« Previous
Overview
Part #: NHT1-120LW | SKU: 806576226956 | Category: Compression Horn Towers / Speakers
MB Quart marine and powersports certified high end 8 inch Wake Tower Coincident Mounted Compression Horns featuring UHS (ultra-high sensitivity) Technology and Wavelength Transparent Acoustic Lenses with a polypropylene cone. Packaged as single units (White) Illuminated
MB Quart marine and powersports certified high end 8 inch Wake Tower Coincident Mounted Compression Horns featuring UHS (ultra-high sensitivity) Technology and Wavelength Transparent Acoustic Lenses with a polypropylene cone. Packaged as single units (White) Illuminated
Specifications
Part #: NHT1-120LW | SKU: 806576226956 | Category: Compression Horn Towers / Speakers
- Certifications
IPX67, Conformal Coated, UVA Certified, CEA426B - RMS Power Handling (CEA426B)
90 watts - Peak Power Handling (CEA426B)
180 watts - Impedance
4 ohm - Frequency Response +/- 10dB
20 Hz - 24kHz - Frequency Response +/- 3dB
48Hz - 27kHz - Sensitivity (1 watt/1 meter)
92 dB - Tower Length
11.2" (286mm) - Hang Height
9.035" (229.5mm) - Height
8.4" (215mm) - Width
8.4" (215mm) - Certifications
IPX67, UVA Certified, CEA426B - Product Dimensions
12 X 10.25 X 15.69 in (30 x 26 x 39.6 cm) - Product Weight
8.1 lbs (3.6 kg)
System Includes
Part #: NHT1-120LW | SKU: 806576226956 | Category: Compression Horn Towers / Speakers
More info in development & coming soon!
More info in development & coming soon!
Features & Benefits
Part #: NHT1-120LW | SKU: 806576226956 | Category: Compression Horn Towers / Speakers
- Marine Grade Protection: LIFE SHIELD Protected for water and dirt. UV protected against sun fade.
- Tweeter Dome Material: 1 Inch Pure Titanium Compression Diaphram Very smooth musical response, with very high output with minimal required amplifier power
- Compression Horn: Coincident Mounted Compression Horn Overall volume is improved as much as +5dB over conventional speakers, Wavelength Transparent Acoustic Lens improves midrange frequencies through the cone
- Surround: Natural Butyl Rubber Remains musical in all weather. Does not stiffen in cold.
- Cone:8 inch Composite Poly Cone Water resistant composite polypropylene cone with temperature stable Butyl rubber surround mounted on a lightweight composite frame
- Voice Coil Former: High Temperature Voice Coil and Former Voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight.
- Spider: Water resistant spider Woven fiber composite spider to stabilize the cone and voice coil in all musical situations.
- Cooling System: Front and Rear Venting Air passes through the spider and back plate to exchange air over the voice coil.
- Crossover Type: 12dB Butterworth Smooth transition from high to lower frequencies remain musicial and not harsh or distorted
- Frame:Composite ABS and glass fiber frame Composites add strenth to the frame without adding distortions or harmonics that can affect the tonal quality of the speaker
- Motor: High Energy Y30 Motor assembly High energy strontium ferrite magnet for higher output with minimal amplifier power
- Grills: Composite UV treated against sun fade and waterproof
- Marine Certified: YES Longer life against harsh conditions. Protected against sun fade with UVA paint coating. Conformal coated crossover components protect against fresh and salt water spray as well as dust and sand.
- IPX67: YES Tested to the highest Marine and Motorsports standards for resisting the elements
- Tweeter Material: Titanium Dome Tweeter Very smooth musical response, high output with minimal required amplifier power
- Marine Certified Crossover: Marine Certified Crossover Conformal Coated, Butterworth 12dB per octave crossover with PTC (Positive Thermal Coefficient) tweeter protection
- Illumination: YES Limitless color choices with color on, off, strobe and programmed “light shows” possible. Optional N1-RC required for control of lighting systems and to sync multiple illuminated speakers. Pre-programmed demo mode included on all lighted systems.
- Enclosure: Injection Molded Enclosure Heavy duty ABS cast enclosure provides strength and improved bass response with increased volume while remaining very light weight
- Mounting System: Steel Reinforced The mounting system between the pipe mount and the tower enclosure has an internal steel mounting plate for additional strength
- Centering Ring: YES Centering ring allows the speakers to tip left/right when mounted to an arced mount
- Mounting Hardware: Powder coated Die Cast Mounts Mounting hardware are Die Cast for strength and powder coated to resisted outdoor elements of sun, spray and dust
- Mounting Hardware Options: Flexible Mounting Eleven mounting hardware options from 1.5" to 2.75” included
Technology
Part #: NHT1-120LW | SKU: 806576226956 | Category: Compression Horn Towers / Speakers
More info in development & coming soon!
More info in development & coming soon!