MB Quart Polaris Off-Road Grade Audio
MB Quart Bobcat Audio

NA2-400.2

NA2-400.2 Powersports Amp

Next »
MB Quart compact mini amplifiers

More Views

https://mbquart.com/na2-400-2/

Be the first to review this product

Part#: NA2-400.2

Details:

MB Quart compact Two Channel, 400 watt Powersports amplifier
$189.99

Overview

Part #: NA2-400.2 | SKU: 806576227342 | Category: NA2 Amplifiers
Description
MB Quart compact Two Channel, 400 watt Powersports amplifier with on-board equalization and simple instalation with quick release connectors.

Specifications

Part #: NA2-400.2 | SKU: 806576227342 | Category: NA2 Amplifiers
  • Class
    Full Range Class D
  • Variable Voltage
    0.2V~9V
  • Signal to Noise Ratio
    >90dB
  • Frequency Response
    20Hz-20kHz
  • Crossover Type
    Electronic 12dB Per Octave
  • Low Pass Crossover
    Switch Low Pass 300 Hz
  • Bass Boost
    0-12dB@45Hz
  • Subsonic Filter
    60Hz
  • Power @ 2-Ohms
    2 x 200W
  • Power @ 4-Ohms
    2 x 100W
  • Total Channels
    2
  • Audio Inputs
    RCA
  • Power Terminal 12v/GND
    Molex 10 ga
  • Speaker Terminal Wire Gauge
    Molex Plug Connector
  • Fusing
    1 x 30 Amps
  • Certifications
    Marine & Powersports
  • Dimensions
    3.70 X 5.51 X 1.77 in
    9.4 X 14.0 X 4.5 cm
  • Weight
    2.12 lbs (0.96 kg)

System Includes

Part #: NA2-400.2 | SKU: 806576227342 | Category: NA2 Amplifiers
More info in development & coming soon!

Features & Benefits

Part #: NA2-400.2 | SKU: 806576227342 | Category: NA2 Amplifiers
  • Marine Grade Protection: YES
    Amplifiers are ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture.
  • Pre-Amp Circuitry: Q-Stasis Pre Amplifier Stage
    The highly engineered Q-Stasis pre-amplifier stage reduces incoming noise from source units dramatically improving sound quality
  • Inputs: 1 Pair, RCA Nickel-Plated
    High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
  • Operation Mode: Two channel operation
    Flexible installation allows this amplifier to run in two channel or bridged mono mode.
  • Crossover / Signal Shaping: Switched FULL / LPF / HPF
    Complete control of amplifier signal, essential when using two or more amplifiers
  • Class / Topology: Full Range Class D
    Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.
  • Output Devices Technology: PWM MOSFET Power Supply
    Stable power through the PC board with minimal heat generation
  • Heat Sink: Aluminum
    Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration
  • Power Supply: Simpatico Coil Design
    The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
  • Output Connections: Quick Dissconect Wires, RCA Connections
    Quickly remove amplifer when you are putting machine up for the winter of as a security precaution
  • Connections Type: Nickel-plated connections
    Nickel plated corrosion resistant connections
  • Diagnostics: Three-stage protection circuits
    Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
  • Marinized / Waterproof: YES
    Water resistant for durability in any environment

Technology

Part #: NA2-400.2 | SKU: 806576227342 | Category: NA2 Amplifiers
More info in development & coming soon!

Support

Part #: NA2-400.2 | SKU: 806576227342 | Category: NA2 Amplifiers
Files & Manuals


Write Your Own Review

Only registered users can write reviews. Please, log in or register