MB Quart Polaris Off-Road Grade Audio

ZK1-116

ZK1-116 Z-Line Speakers

Next »
MB Quart Z-Line 6.5 inch speakers

More Views

http://mbquart.com/zk1-116/

Be the first to review this product

Part#: ZK1-116

Details:

MB Quart Z-Line 6.5 inch 2 way car audio coaxial speaker system with ceramic coated, titanium dome tweeters (pair)
$169.99

Overview

Part #: ZK1-116 | SKU: 806576224594 | Category: Z-Line Speakers
Description
TOP OF THE LINE - MB Quart Z-Line 6.5 inch 2 way car audio coaxial speaker system with ceramic coated, titanium dome tweeters with the removable phase lens (pair)

Specifications

Part #: ZK1-116 | SKU: 806576224594 | Category: Z-Line Speakers
  • Power Handling RMS
    60 watts
  • Power Handling Peak
    120 watts
  • Impedance
    4 Ohm
  • Crossover Point
    3.2 kHz
  • Sensitivity (1 watt / 1 meter)
    88db
  • Frequency Response +/- 10dB
    20Hz - 20,000Hz
  • Crossover Slope
    6dB/12dB per octave
  • Cut-Out Ø
    5.59" (142mm)
  • Chassis depth from flange
    2.56" (65mm)

Specifications

Part #: ZK1-116 | SKU: 806576224594 | Category: Z-Line Speakers

PRODUCT REVIEW
See the review of the MB Quart components, ZC1-216 in Gizmodo

    • Ceramic Coated 1.4” (38mm) Titanium Dome Tweeter
      Ceramic coating helps to reduce over tones and harmonic distortions that can occur when using Titanium at higher power levels. The unique tweeter assures the system is producing the highest sound quality with the lowest distortions.
    • 35mm (1”) dome on a 25mm (1”) voice coil
      Creating a larger radiating area on the dome creates more output giving the tweeter a louder yet smoother sound.  
    • Removable Phase Lens 
      The phase lens allows “Dispersion Tuning” which permits the listener to widen or narrow the width of the soundstage depending on the chosen mounting location. When the tweeter is installed away from listeners or pointing at a windshield, a wide dispersion is better - phase lens on. 

      When the tweeter is mounted with direct access to the listener, the phase lens off, creates a narrow soundstage with brighter high tones. Additionally, the phase lens aides in reducing harsh harmonic that can develop at higher frequencies.  

    • Nylon Surround
      The Z-Line tweeters are mated to a Nylon Surround which dramatically reduces the Fs specification. Subsequently, you will hear very smooth high frequencies, even when pushing the system hard. 
    • Oversized thermal formed cone
      The injection molded Polypropylene Cone delivers impactful midrange/midbass and is perfectly matched to the Butyl Rubber Surround for great sound.
    • Under mounted UV butyl surround
      Mounting the surround on the backside of the cone improves strength.  Flexible piston action UV protected rubber which will be impervious to temperature swings of very warm and very cold.   

    • PA66 composite Baskets with Glass Fiber reinforcement
      PA66 is a composite cast material designed to be used in future orbital spacecraft. Its purpose is incredible strength but lightweight. PA66 is what NASA uses to eliminate metal parts with composites.  

      PA66 is far more temperature and chemical resistant than standard plastics or ABS. This is important when developing low midrange and bass frequencies in a small diameter driver.  Reduce the flex in the frame and you tighten the sound by eliminating weak points in the mounting system.  

    • ABS Gasket
      Strong ABS plastic is used to seal the mounting  between the speaker frame and the vehicle  
    • Tinsel Leads Silicone Jacket
      Silicone jacketed, extra flexible leads for strength and durability  
    • Voice Coil Former
      Aluminum - Lightweight aluminum former which helps voice coil dissipate heat
    • Bumped Design Cotton Spider
      Adhesive impregnated cotton spider with bumped design which allows for more clearance and longer excursion  
    • Crossover Design 
      12db high-pass / low pass crossover on coax hidden in the pole piece of the tweeter. High end capacitors and resistors create a smooth transition between midbass tones from the woofer/midbass higher frequencies handled by the tweeter.  These crossover points make critical frequencies seamless and distortion free.  
    • Spring Loaded Terminals
      All speakers utilize spring loaded connectors for positive and negative speaker wire connections. Connectors are satin finish nickel plated brass to resist rust
    • Mounting / Installation 
      Euro-DIN - Unique shaped mounting brackets and holes to accommodate OEM and custom installations for midrange

Technology

Part #: ZK1-116 | SKU: 806576224594 | Category: Z-Line Speakers
More info in development & coming soon!

Specifications

Part #: ZK1-116 | SKU: 806576224594 | Category: Z-Line Speakers
Files & Manuals


Write Your Own Review

Only registered users can write reviews. Please, log in or register

Maxxsonics Factory Specials
Maxxsonics Factory Specials