MB Quart Polaris Off-Road Grade Audio

ZA2-1000.1D

ZA2-1000.1D Amplifier

« Previous Next »
ZA2-1000.1D

More Views

http://mbquart.com/za2-1000-1d/

Be the first to review this product

Part#: ZA2-1000.1D

Details:

1000 watt mono, 1 ohm stable, subwoofer car audio amplifier

Regular Price: $299.99

Special Price: $139.00

Overview

Part #: ZA2-1000.1D | SKU: 806576227083 | Category: MaxxFactory Products
Description
MB Quart ZA2 1000 watt, Class Q1 (Class D) Circuitry, mono subwoofer amplifier putting out 1000 watts of RMS power

Specifications

Part #: ZA2-1000.1D | SKU: 806576227083 | Category: MaxxFactory Products
  • Class
    Class Q1 (Class D)
  • Variable Voltage
    6.0V - 0.2V
  • Signal to Noise
    >90dB
  • Frequency Response
    10-300Hz
  • Crossover Type
    Variable Electronic
  • Low Pass Crossover:
    12dB Per Octave:

    30Hz-250Hz
  • THD Percent
    <0.05
  • Bass Boost
    0-9db
  • Subsonic Filter
    10-40Hz
  • RMS Power Output @ 1 Ohm:
    1 x 1000W
  • RMS Power Output @ 2 Ohms:
    1 x 500W
  • RMS Power Output @ 4 Ohms
    1 x 350W
  • Total Channels
    Mono
  • Audio Inputs:
    1 Pair RCA Jacks
  • Audio Outputs:
    1 Pair RCA Jacks
  • Power Terminal:
    12v/GND

    2 ga
  • Speaker Terminal Wire Gauge
    10 ga
  • Fusing
    60Ax1
  • Dimensions
    15.75 X 10.63 X 3.25 in
    40 x 26.6 x 8.2 cm
  • Weight
    8.4 lbs (3.8 kg)

Specifications

Part #: ZA2-1000.1D | SKU: 806576227083 | Category: MaxxFactory Products
  • Pre-Amp Circuitry: Q-Stasis Pre Amplifier Stage
    Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion
  • Inputs: Nickel Plated
    High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
  • Operation Mode: Mono Mode
    Purpose built 1 channel amplifier for driving subwoofers and subwoofer systems
  • Crossover / Signal Shaping: Adjustable Low Pass Filters
    With adjustable potentiometers the low frequency subwoofers, the system can be fine tuned to maxximize power in the subwoofer system.
  • Class / Topology: Class Q1 (Class D)
    Very efficient D-Class to drive additional power to subwoofer frequencies while remaining in a small footprint. The Class Q1 circuitry is deigned to perfectly deliver signal to the FLUID-FET devices to make big power.
  • Output Devices Technology: FLUID-FETS
    Uniquely selected MOSFET devices, designed specifically to augment the Class SQ and Class Q1 circuitry of all MB Quart amplifier designs.
  • Heat Sink: Focused mass aluminum
    Unique low profile heavy duty aluminum heat-sink to dissipate heat
  • Power Supply: High frequency power supply design
    Maximum efficiency power supply to deliver maximum power with minimal impact on the vehicles electrical system
  • Bass Remote: Included
    Wired Bass Remote allows adjustments to bass frequencies to be made from the control mounted anywhere in the vehicle.
  • Output Connections: Nickel-Plated
    Nickel Plated Brass Connection with Hex Set Screw terminals allow for secure connection and resist erosion
  • Connections Type: Molded / Angled
    Secure connection for all system wires. Angled for ease of access for installation
  • Signal Pass Through: RCA outputs
    Daisy chain multiple amplifier to eliminate additional signal cables from the source unit
  • Diagnostics: Three-stage protection circuits
    Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
  • Illumination: YES
    The MB Quart - Red Chiclet in the logo lights up to easily identify your amplifier as a top of the line, advanced technology choice

Technology

Part #: ZA2-1000.1D | SKU: 806576227083 | Category: MaxxFactory Products
More info in development & coming soon!

Specifications

Part #: ZA2-1000.1D | SKU: 806576227083 | Category: MaxxFactory Products
Files & Manuals


Write Your Own Review

Only registered users can write reviews. Please, log in or register