MB Quart Polaris Off-Road Grade Audio

TEQ

Amplifiers
Q: I need help with my installation. Can I call someone with questions?
A:
Most likely no. Due to the revolution of enthusiasts shopping online instead of shopping at stereo shops with installers, consumers find themselves in a pinch. You need a certified installer to properly install and troubleshoot an installation. In the USA, we rely on the team at Mobile Electronics Certification Program to train and prepare professional installers.

MECP To find certified professionals in your area, you can visit their website:
Mobile Electronics Certification Program

Additionally, when you are talking to an installer, ask them if they are MECP certified.

Crunch and Maxxsonics USA stand behind our products 100%. However, we cannot advise you on how to install or troubleshoot your system. The first step is always, read the owner’s manual. We work hard to make sure that you can get your product installed in the car, and make it play music. Step two is, hire and pay for the help of a certified installer.

Imagine, you buy a kit airplane, you and your dad always talked about… “let’s build our own airplane in the garage” and you do. Then, when it’s all done, you call the manufacture of that plane and say, “I have some questions about how to fly this product I bought from you. Can you teach me?”

There is the rub. Having it, buying it, getting a great price, is not the end of the process. Getting it installed, adjusting it, making it sound fantastic for you and your musical style, requires a trained professional. Not your neighbor’s nephew who took a woodshop class in 8th grade. #InstallFail

The industry states that, 90% of DIY installers did not go to school for car audio or automotive electronics. Today’s vehicles are very complex. Electrical systems are all tied together with safety controls like air bags, auto-start, On-Star communications, Navigation systems, etc. If you hook up the wrong thing to the wrong thing, you can have a serious issue on your hands.

Therefore, for safety, for liability reasons and the unpredictable nature of electrical systems and the complex systems in a vehicle, we cannot advise on installations.

You will find here, several tools that offer insights on trouble shooting.

It is advised that questions about installations, things that do not work, gremlins that can creep up in the installation, be addressed in person with an MECP installation facility that has a Mobile Electronics Certified Professional. These industry pros have studied for years, been tested and have the credentials to do a proper installation and trouble shoot your installation. To find an MECP installer near you, go to their website, or call your local car audio shop and ask, “are your installers, MECP certified”? If they are not, move on.

If, after full review of our on-line TEQ support, you feel you have a product that you just need some help with, you may email our tech support. After they have reviewed your comments, they will email you back some guidance. The turnaround time can be 24-48 hours depending on the number of questions in front of yours. Questions are answered Monday - Friday but a small team of industry professionals.

DIY
As you can read from the previous paragraph, audio equipment installations can be complicated. It is not always as simple as “just drop it in” – unless, your project is as simple as “just drop it in”. Some projects really are designed for the “do it yourself” person with a bit of skill and a lot of common sense. Changing out a blown speaker, pretty simple, installing a sound bar, not really difficult. Just follow the manual, use the proper tools and as we have mentioned, consider a professional installer.
Q: My amplifier needs repair, can I get repairs?
A:
Yes, we advise that you contact:

Audio Clinic
355 N Lantana St.
#737
Camarillo, CA 93010

Phone: (805) 390-0119
Q: I would like to repair my amplifier, can I buy parts?
A:
No, we do not sell parts for amplifiers or provide schematics. You can have an amplifier repaired, please contact:

Audio Clinic
355 N Lantana St.
#737
Camarillo, CA 93010

Phone: (805) 390-0119
Q: How do I install my amplifier or amplifiers?
A:
Step 1, call a certified professional installer.

Chances are, if you are reading this, “audio component installation” was not a career choice. For several hundred thousand people in the world, installing, tuning and mastering the complexities of installation is all they do.

If you would look on the internet for “how to operate on my spleen?” Then perhaps you are the DIY type person that just must give it a shot, then here are a few guides that you may find helpful, before you decide to call a professional.

System Design
The success of any car stereo system relies on several factors, such as the system design, execution of the installation, and system setup. Remember that any system is only as good as its weakest link.

Also, remember that higher power systems are not necessarily useful purely for high sound pressure levels, but also to establish headroom capability, to reproduce musical peaks cleanly without distortion. Lower power amplifiers will clip earlier than their more powerful cousins, and cause loudspeaker failure when overdriven, due to the distortion generated by a clipped signal, thus overheating voice coils.

Purchase the best quality RCA cables you can afford, for reliability and less engine noise interference in the audio system.
Q: What kind of Power/Ground wire should I choose for my amplifier installation and what should it cost?
A:
First, your target should ALWAYS be true copper. This will be marketed as 99.9% oxygen free copper wire.

You do NOT want CCA or Copper Clad Aluminum wire. This means that the copper content is wrapped around an aluminum core so that it “looks” like copper but it is really not. This CCA wire is not as conductive, can limit amplifier power and performance, and is susceptible to overheating as you will see demonstrated in the video below.

Here is a technical video from Garry Springgay of Cogent Labs comparing CCA versus Oxygen Free Copper. This short video will teach you everything you need to know about wire and what the problems are when you choose really poor quality cables for your expensive amplifier investment.


Secondly, when it comes to choosing an amplifier kit or buying the components, here is a very easy mathematical solution – spend 30%.

FORMULA
Amp Price x 30% OFC Amp Kit = Price of Amp Kit

EXAMPLE
$300 Amp Investment x 30% = $90 Amp Kit

Depending on the extras that may be included like a nice fuse holder, upgraded RCA cable with gold ends, a twisted pair technology, zip ties for mounting the fuse, etc.. An amp kit like this may cost up to $150.

This is ok and you should feel great about your high performance system.

If you are hooking up your $300 amplifier investment to a $15 amp kit, you WILL have a problem with performance, longevity, and possibly have a complete melt down of your electrical system which could cause an alternator failure or worse - a car fire.

Q: How do I properly ground my amplifier?
A:
You do it properly; it is the #1 mistake made installing and amplifier.

The Elusive Amplifier Ground
Why is the ground so important? Why does the power and ground wire have to be the same size? Why can’t I use the seat belt bolt? What is the proper way to ground?

Amplifiers are high current devices that require a lot of power to make power and with all that power coming into the amplifier, the exit path is just as important.

The wire size is very important for delivering the power (remember - what comes in must come out). With that being said, if you are using a 4 gauge wire on the battery lead, what would need to be used on the ground lead? That’s right folks, 4 gauge wire. If you don’t use the same size wire it will cause a “road block”, or in electronic terminology, resistance. A resistance may cause other issues like heat, noise or even failure of the amplifier.

Ground Wires

The most commonly used ground point for an amplifier system is the seatbelt mount. The reason that this point is used is that it is easily accessible and very close to where the amplifier is mounted. But the seatbelt mount is NOT an acceptable location to ground the amplifier, because the seatbelt mount is designed and used for one thing, the safety of the occupants of the vehicle.

No Bolt Screw

NO EXISITING BOLT OR SCREW IS ACCEPTABLE AS A GROUNDING LOCATION

The best ground for your audio system should be to clean, bare metal and as should also be as short as possible. Your entire vehicle is a big ground plane. Always look on the underside from where you are planning to ground to assure there is nothing in the way like brake lines, gas lines or even the gas tank.

How to Properly Ground an Amplifier

Next, take a wire brush or even a piece of sandpaper and remove the paint to expose the metal The best way to secure your ground is to use a nut and bolt, but if that is not able to be done use the proper sized screw.

Wire Mount

In conclusion, the ground wire needs to be the same wire size as the power wire and mounted to a clean, bare metal panel as close to the amplifier as possible. By adhering to these few easy steps your high current stereo system should work flawlessly.
Q: How do I wire my amplifier for 4, 2 or 1 ohm?
A:
Be very careful when you start wiring your subwoofer system. Some amplifiers are only 2 ohm stable, others are 1 ohm stable. If you are not familiar with how impedance and frequency are related, you need a professional installer and at minimum need to be working with a voltage meter.

Here are some guides. Each amplifier will be a little different, it is critical that you know the capabilities of your amplifier by reviewing the specifications in the individual owner’s manual.

2 Ohm / 4 Ohm Amplifier Load
Follow this diagram for presenting your amplifiers a 2 or 4 ohm load depending of if you are using dual 4 ohm or dual 2 ohm subwoofers.

DUAL VOICE COIL SUBWOOFERS
2ohm 2ohm dvc, 4ohm 4ohm dvcSeries Parallel DVC Sub

1 Ohm Amplifier Load
Follow this diagram for presenting your amplifiers a 1 ohm load using 4 ohm DVC subwoofers.

DUAL VOICE COIL SUBWOOFERS
4ohm 1ohm dvcParallel Parallel DVC Sub

WARNING – NEVER USE THIS CONFIGURATION WITH DUAL 2 OHM SUBWOOFERS

1 Ohm / 2 Ohm Amplifier Load
Follow this diagram for presenting your amplifiers a 1 or 2 ohm load depending of if you are using dual 4 ohm or dual 2 ohm DVC subwoofers.

DUAL VOICE COIL SUBWOOFERS
2ohm 1ohm dvc, 4ohm 2ohm dvcParallel DVC Sub

2 Ohm / 8 Ohm Amplifier Load
Follow this diagram for presenting your amplifiers a 2 or 8 ohm load depending of if you are using dual 4 ohm or dual 2 ohm DVC subwoofers.

DUAL VOICE COIL SUBWOOFERS
2ohm 4ohm dvc, 4ohm 8ohm dvcSeries DVC Sub

4 Ohm / 16 Ohm Amplifier Load
Follow this diagram for presenting your amplifiers a 4 or 16 ohm load depending when using SVC 4 ohm or single 8 ohm subwoofers.

SINGLE VOICE COIL SUBWOOFERS
4ohm 8ohm svc, 8ohm 16ohm svcSeries SVC Sub

2 Ohm / 4 Ohm Amplifier Load
Follow this diagram for presenting your amplifiers a 2 or 4 ohm load when using SVC 4 ohm or single 8 ohm subwoofers.

SINGLE VOICE COIL SUBWOOFERS
4ohm 2ohm svc, 8ohm 4ohm svcParallel SVC Sub
Q: How do I bridge an amplifier?
A:
Bridging an amplifier is a way to optimize your amplifier performance with your speaker configuration and system design. Bridging refers to combining two channels of an amplifier into one channel. This creates 2x the output voltage which in turn creates 2x the power.

Always confirm that your speakers can handle this amount of power. It is important to note that “bridging” is not the same as mono, you cannot bridge a monoblack amplifier as it is already a single channel.

A 4 ohm subwoofer system connected to an amplifier in bridged mode only “presents” half the impedance.

Also, many multi-channel amplifiers can be bridged, but again, you must confirm that a specific amplifier can be bridged. Always refer to the owner’s manual.

Typical wiring to bridge a two channel amplifier.

Amp Bridge
Q: My amplifier says it is Strappable. What does that mean?
A:
When an amplifier is “Strappable” or Power Strappable, think of it as external bridging of two mono amplifiers. If you have two 1500 watt amplifiers you can combine them two create a 3000 watt amplifier system.

Level setting, crossover points, ground and phase settings are all very critical to this set up. Strapping should never be attempted by someone who is not an MECP certified installer.

Amp Strappable

Power Strapping allows you and your installer to Sync the input signal and output power to double rated output of a mono amplifier to drive a single or group of subwoofers. Driving subwoofers with this method doubles the available power to the overall bass system, while insuring each subwoofer receives the exact same power level.
Q: How do I use two amplifiers together on one mono subwoofer?
A:
See the answer to “Strappable” above.
Q: How do I use a High Pass or Low Pass electronic crossover?
A:
An amplifier will have a High Pass or a Low Pass, a multi-channel amplifier will have both. They are very easy to understand. A HPF or “High Pass Filter” let’s the high frequencies pass through to your speakers, while blocking the lower frequencies. An LPF or “Low Pass Filter” does the same, but allows the low frequencies to pass through.

The purpose of an amplifier having these filters or crossovers is to tailor the sound coming out of an amplifier to the speakers or subwoofers it is connected to. In this diagram from you can see where the frequencies begin to reduce in amplitude.

5000 Hz Low and high Pass Curves (18 dB per Octave)

The crossover frequency is chosen by the setting on the dial or switch. Everything above or below the selected frequency is being sent through to your speakers.

HPFLPF
Q: How do I use a parametric or quasi-parametric EQ?
A:
The Parametric or Quasi-Parametric EQ featured in many amplifiers is designed to offer very advanced signal shaping to system designers. Typically, there are 3 adjustments.

  1. Center Frequency – This is where you tell the crossover which frequency you are going to adjust.
  2. Width – This is how you control whether you are going to adjust a very narrow band, say from 40Hz to 45Hz only.
  3. Boost – Once you have set the Center and Width, you adjust the gain or boost bass.
Bass EQ

But, if not adjusted correctly, it can be over used and cause damage to your subwoofers and amplifiers. It is best to slowly turn this setting clockwise until the desired bass impact is felt. It is not recommended to exceed the 12 o’clock position unless listening at a low volume or a low recording quality as this can result in high distortion and premature clipping.
Q: How do I set the gain control on an amplifier?
A:
The Gain control on an amplifier is designed to match the voltage coming out of a head unit, CD player, 8 track tape, etc. It is NOT an bonus volume control. Having a mismatched gain structure between your source unit and amplifier input stage will result in distorted sound. It will make you think you have a blown speaker or a blown amplifier. So, as always, the first step, is recruit the skills of a certified installer – preferably one that has MECP certification and at minimum, one with years of experience setting up and find tuning car audio systems.

Ensure that the Level is turned completely to the left prior to turning the system on. Next you should play an audio track that you are familiar with to use as a reference, and turn the head unit volume control to about 80% of its full setting. The system sound level will of course be very low, and the following procedures will help you to match the amplifier input sensitivities properly to the head unit output signal level. Turn the level control up slowly, till you hear distortion, and then back off a few degrees on the control. If at any point your amplifier goes into protection, you will need to turn the level to the left a bit and then try again. If you reach a point where the output does not increase, stop turning the Level control to the right as the amplifier/subwoofer combo has reached its maxx output in this application. The Clipping Indicators on the end panel of the amp.
Q: My amplifier has a Phase control, what is that?
A:
A variable Phase adjustment allows you to change the relative time that the waveform meets your ear. With standard subwoofer installations where the subwoofer is behind you, the Phase should generally be at 0. When subwoofers or woofers are in the kick panels or door panels, the Phase adjustment is useful in delaying the timing of the wave meeting your ear by adjusting the potentiometer until it sounds best to you.
Q: My amplifier has a subsonic filter, what is that?
A:
The Subsonic Filter acts as a low frequency cut off for your system bass reproduction. For example, If you adjust the Subsonic to 25Hz, the amplifier will not play frequencies below 25Hz but will play frequencies from 25Hz up to the chosen Low Pass frequency.
Q: Why does my amplifier have an output set of RCA cables?
A:
In an effort to reduce the number of signal cables needed for multi-amplifier systems, many amplifiers will offer a set of RCA outputs. These outputs are full range so you can connect the output to either a full range amplifier or subwoofer amplifiers.
! Email TEQ Support
Subwoofers & Speakers
Q: I need help with my installation. Can I call someone with questions?
A:
Most likely no. Due to the revolution of enthusiasts shopping online instead of shopping at stereo shops with installers, consumers find themselves in a pinch. You need a certified installer to properly install and troubleshoot an installation. In the USA, we rely on the team at Mobile Electronics Certification Program to train and prepare professional installers.

MECP To find certified professionals in your area, you can visit their website:
Mobile Electronics Certification Program

Additionally, when you are talking to an installer, ask them if they are MECP certified.

Crunch and Maxxsonics USA stand behind our products 100%. However, we cannot advise you on how to install or troubleshoot your system. The first step is always, read the owner’s manual. We work hard to make sure that you can get your product installed in the car, and make it play music. Step two is, hire and pay for the help of a certified installer.

Imagine, you buy a kit airplane, you and your dad always talked about… “let’s build our own airplane in the garage” and you do. Then, when it’s all done, you call the manufacture of that plane and say, “I have some questions about how to fly this product I bought from you. Can you teach me?”

There is the rub. Having it, buying it, getting a great price, is not the end of the process. Getting it installed, adjusting it, making it sound fantastic for you and your musical style, requires a trained professional. Not your neighbor’s nephew who took a woodshop class in 8th grade. #InstallFail

The industry states that, 90% of DIY installers did not go to school for car audio or automotive electronics. Today’s vehicles are very complex. Electrical systems are all tied together with safety controls like air bags, auto-start, On-Star communications, Navigation systems, etc. If you hook up the wrong thing to the wrong thing, you can have a serious issue on your hands.

Therefore, for safety, for liability reasons and the unpredictable nature of electrical systems and the complex systems in a vehicle, we cannot advise on installations.

You will find here, several tools that offer insights on trouble shooting.

It is advised that questions about installations, things that do not work, gremlins that can creep up in the installation, be addressed in person with an MECP installation facility that has a Mobile Electronics Certified Professional. These industry pros have studied for years, been tested and have the credentials to do a proper installation and trouble shoot your installation. To find an MECP installer near you, go to their website, or call your local car audio shop and ask, “are your installers, MECP certified”? If they are not, move on.

If, after full review of our on-line TEQ support, you feel you have a product that you just need some help with, you may email our tech support. After they have reviewed your comments, they will email you back some guidance. The turnaround time can be 24-48 hours depending on the number of questions in front of yours. Questions are answered Monday - Friday but a small team of industry professionals.

DIY
As you can read from the previous paragraph, audio equipment installations can be complicated. It is not always as simple as “just drop it in” – unless, your project is as simple as “just drop it in”. Some projects really are designed for the “do it yourself” person with a bit of skill and a lot of common sense. Changing out a blown speaker, pretty simple, installing a sound bar, not really difficult. Just follow the manual, use the proper tools and as we have mentioned, consider a professional installer.
Q: My subwoofer or speaker needs a repair or a re-cone kit, can I buy those parts?
A:
No, we do not sell parts for speakers or subwoofers.
Q: Which direction should a subwoofer face for best performance?
A:
There is no answer here. This will depend on the vehicle, the shape of the back of the car, hatch, trunk, etc.

Since sound comes to our ears in waves, the length of the wave is what is critical. So, you will just have to try a few options and find the placement and location that works best for your ears, taste in music and vehicle.
Q: How do I wire my subwoofers?
A:
Be very careful when you start wiring your subwoofer system. Some amplifiers are only 2 ohm stable, others are 1 ohm stable. If you are not familiar with how impedance and frequency are related, you need a certified installer and at minimum need to be working with a voltage meter.

Here are some guidelines.

Each amplifier will be a little different, of course subwoofers are all different too. Different impedance, single or dual coils, how many you are using, in series, parallel or series/parallel are all critical pieces of information that you will need before you start “wiring up”.

It is very important that you know the capabilities of your amplifier by reviewing the specifications in the individual owner’s manual before wiring up the subwoofers.

2 Ohm / 4 Ohm Amplifier Load
Follow this diagram for presenting your amplifiers a 2 or 4 ohm load depending of if you are using dual 4 ohm or dual 2 ohm subwoofers.

DUAL VOICE COIL SUBWOOFERS
2ohm 2ohm dvc, 4ohm 4ohm dvcSeries Parallel DVC Sub

1 Ohm Amplifier Load
Follow this diagram for presenting your amplifiers a 1 ohm load using 4 ohm DVC subwoofers.

DUAL VOICE COIL SUBWOOFERS
4ohm 1ohm dvcParallel Parallel DVC Sub

WARNING – NEVER USE THIS CONFIGURATION WITH DUAL 2 OHM SUBWOOFERS. THE AMPLIFIER WILL BE DAMAGED.

1 Ohm / 2 Ohm Amplifier Load
Follow this diagram for presenting your amplifiers a 1 or 2 ohm load depending of if you are using dual 4 ohm or dual 2 ohm DVC subwoofers.

DUAL VOICE COIL SUBWOOFERS
2ohm 1ohm dvc, 4ohm 2ohm dvcParallel DVC Sub

2 Ohm / 8 Ohm Amplifier Load
Follow this diagram for presenting your amplifiers a 2 or 8 ohm load depending of if you are using dual 4 ohm or dual 2 ohm DVC subwoofers.

DUAL VOICE COIL SUBWOOFERS
2ohm 4ohm dvc, 4ohm 8ohm dvcSeries DVC Sub

4 Ohm / 16 Ohm Amplifier Load
Follow this diagram for presenting your amplifiers a 4 or 16 ohm load depending when using SVC 4 ohm or single 8 ohm subwoofers.

SINGLE VOICE COIL SUBWOOFERS
4ohm 8ohm svc, 8ohm 16ohm svcSeries SVC Sub

2 Ohm / 4 Ohm Amplifier Load
Follow this diagram for presenting your amplifiers a 2 or 4 ohm load when using SVC 4 ohm or single 8 ohm subwoofers.

SINGLE VOICE COIL SUBWOOFERS
4ohm 2ohm svc, 8ohm 4ohm svcParallel SVC Sub
Q: Does my subwoofer need a vented (ported) box or a sealed box?
A:
Every subwoofer has a specific set of criteria called the Thiele / Small Parameters, sometimes called the T/S Specs. These specs help a Certified Installer know what type of enclosure or box to build. Many subwoofers can fit into a generic vented or sealed enclosure.

Sealed
Sealed enclosures offer a range of performance profiles depending on the internal air volume. Larger enclosures will have a smoother more extended response while a small enclosure will have increased output in a more focused frequency range.

Sealed enclosures are the simplest to construct but do require that the box be completely air tight.

Sealed

Vented / Ported
Vented designs offer the ability to tune the enclosure. Larger enclosures will have a smoother more extended response while a small enclosure will have increased output in a more focused frequency range. Vented enclosures are more difficult to construct but offer more overall output.

Vented/Ported

In order to design the best enclosure for a given subwoofer, you will need the Thiele / Small Parameters for that specific subwoofer. They will be located in the individual product manual for your subwoofer.

Our manuals offer basic enclosure designs, both Sealed and Vented. Anything beyond those basic enclosures should be handled by a Certified Installer.
Q: How do I build an enclosure properly?
A:
Enclosure Materials are very important. You should try and use 5/8 inch or 3/4 inch MDF (Medium Density Fiber Board) is best for most applications, however, 3/4 inch MDF is best.

Enclosure Build Materials
Connecting joints need to be glued and screwed to ensure no air escapes and joints do not separate under high pressure. Simple butt joints work well, however, rabbet joints are preferred.

Bracing
Internal bracing is also recommended to prevent flexing and to strengthen the enclosure.

Note: The volume taken up by the bracing should be added to the total enclosure interior volume.

There are two common bracing methods.

  1. Corner Bracing: These help prevent the connection joints from separating under heavy vibration and air pressure. Use 1 inch x 1 inch strips at all interior joints.
  2. Diagonal Bracing: These internal braces connect the top side to the bottom side as well front side to back side. This prevents the wood from bowing or pushing outwards. Use 1 inch x 2 inch braces that are glued and screwed.
Glued
Details of a proper assembled, glued and screwed enclosure
Screwed
Q: I keep blowing up subwoofers, what is the problem?
A:
This is hard to learn. Clean power, rarely blows speakers or subwoofers. Distortion is the enemy here. As an amplifier starts to produce more distortion that clean power, the speakers and subwoofers try to produce that signal. They are not made to do this. Everything starts to overheat and things start to break.

When the signal or music begins to sound distorted (this is also called clipping) the subwoofers or speakers stop performing as they were designed to do.

The fix is to turn it down. Next, have a Certified Installer check your wiring. You may have accidently wired your system for the wrong impedance.
Q: I measured my car for subwoofers, how do I get to the cubic feet / volume measurement?
A:
You only need this formula and use a calculator or a sharp pencil.

Length (in inches) x Width (in inches) x Depth (in inches) = XXXX

XXXX divided by 1728 = YYYY

YYYY will be your cubic feet volume of air

Dimensions
Q: How do I set my Low Pass (LPF) Filter on my amp for my subwoofer?
A:
The Low pass filter will allow only the bass frequencies to reach the woofer making for a more natural transition to the higher frequency drivers. You can make small adjustments to the LPF frequency and listen to the system with several tracks of your favorite music. Then you will find the best crossover point for you. Check your amplifier’s manual for details.

LPF
Q: How do I set the Subsonic Filter on my amplifier to make my subwoofers sound great?
A:
The Subsonic filter on your amplifier will help to protect the woofer from extreme low frequency distortion. These are tones that you cannot hear, but your subwoofer will try to produce. Many amplifiers are equipped with this type filter. Check your amplifier’s manual for details.

Subsonic
Q: What are Thiele / Small Parameters?
A:
These are the specs or parameters by which an engineer controls the performance of a subwoofer. These T/S specs are required for a Certified Installer to design and build a high performance, great sounding enclosure for a subwoofer system. You can read the history of Thiele / Small specs here.

Here is a common glossary of terms in subwoofer specifications.

Q: The energy losses of relative damping (ratio of stored to dissipated energy or ratio of reactive to resistive energy).

Fs: Free air resonance of driver in Hz.

Qms: Mechanical Q.

Vas: Volume of air equivalent to driver from the rest position.

Cms: Mechanical compliance of a loud speaker piston.

Mms: Moving mass of total loud speaker piston assembly.

Xmax: The maximum linear excursion of a loud speaker.

Sd: Surface area of the cone.

Dia: The piston diameter of a loud speaker.

Qes: Electrical Q of a system.

Re: DC resistance.

Le: VC inductance.

Pe: Maximum input power.

Qts: Total Q of the system.

Sens: Sensitivity. An efficiency measurement in dB’s.

Vc: Volume of a closed or sealed enclosure.

Vb: Volume of a vented enclosure.

Fc: The resonant frequency of a closed or sealed system.

Fb: The resonant frequency of a vented system.

F3: The half-power (-3dB) frequency of a loud speaker enclosure.

Qtc: The Q of a loud speaker at Fc in a closed box, considering both its electrical and mechanical resistance.

QL: The Q of a vented box, resulting from all box losses.

DV: Diameter of vent.

LV: Length of vent.
Q: Can you gift wrap my subwoofers or speakers?
A:
No, sorry, we do not gift wrap.
! Email TEQ Support
Signal Processors
Q: I need help with my installation. Can I call someone with questions?
A:
Most likely no. Due to the revolution of enthusiasts shopping online instead of shopping at stereo shops with installers, consumers find themselves in a pinch. You need a certified installer to properly install and troubleshoot an installation. In the USA, we rely on the team at Mobile Electronics Certification Program to train and prepare professional installers.

MECP To find certified professionals in your area, you can visit their website:
Mobile Electronics Certification Program

Additionally, when you are talking to an installer, ask them if they are MECP certified.

Crunch and Maxxsonics USA stand behind our products 100%. However, we cannot advise you on how to install or troubleshoot your system. The first step is always, read the owner’s manual. We work hard to make sure that you can get your product installed in the car, and make it play music. Step two is, hire and pay for the help of a certified installer.

Imagine, you buy a kit airplane, you and your dad always talked about… “let’s build our own airplane in the garage” and you do. Then, when it’s all done, you call the manufacture of that plane and say, “I have some questions about how to fly this product I bought from you. Can you teach me?”

There is the rub. Having it, buying it, getting a great price, is not the end of the process. Getting it installed, adjusting it, making it sound fantastic for you and your musical style, requires a trained professional. Not your neighbor’s nephew who took a woodshop class in 8th grade. #InstallFail

The industry states that, 90% of DIY installers did not go to school for car audio or automotive electronics. Today’s vehicles are very complex. Electrical systems are all tied together with safety controls like air bags, auto-start, On-Star communications, Navigation systems, etc. If you hook up the wrong thing to the wrong thing, you can have a serious issue on your hands.

Therefore, for safety, for liability reasons and the unpredictable nature of electrical systems and the complex systems in a vehicle, we cannot advise on installations.

You will find here, several tools that offer insights on trouble shooting.

It is advised that questions about installations, things that do not work, gremlins that can creep up in the installation, be addressed in person with an MECP installation facility that has a Mobile Electronics Certified Professional. These industry pros have studied for years, been tested and have the credentials to do a proper installation and trouble shoot your installation. To find an MECP installer near you, go to their website, or call your local car audio shop and ask, “are your installers, MECP certified”? If they are not, move on.

If, after full review of our on-line TEQ support, you feel you have a product that you just need some help with, you may email our tech support. After they have reviewed your comments, they will email you back some guidance. The turnaround time can be 24-48 hours depending on the number of questions in front of yours. Questions are answered Monday - Friday but a small team of industry professionals.

DIY
As you can read from the previous paragraph, audio equipment installations can be complicated. It is not always as simple as “just drop it in” – unless, your project is as simple as “just drop it in”. Some projects really are designed for the “do it yourself” person with a bit of skill and a lot of common sense. Changing out a blown speaker, pretty simple, installing a sound bar, not really difficult. Just follow the manual, use the proper tools and as we have mentioned, consider a professional installer.
Q: Why do people use signal processors?
A:
Signal processing is already built into your system. It is everywhere. Inside your dash source unit with: bass, treble, fader and balance at a minimum. Some source units offer loudness contour and several equalization curves – even some you can customize. All of these are a form of signal processing.

Inside an amplifier, you will have switches and potentiometers to control crossover frequencies and features like bass boost. Even a remote bass control that you mount in the front of the vehicle is signal processing. You can see, that signal processing is important.
Q: Do I need an external signal processor?
A:
Perhaps you do. If you find that when your system is complete, that you do not have enough control to tailor the sound perfectly to your tastes, you may need a signal processor. There are a few options.

  • IN-DASH: This type of unit typically has 3 or more bands of EQ, a Master System volume and may give you several additional inputs. These units are perfect for the person that finds nearly every track of music needs to have a little adjustment to the tone.
  • BLACK BOX: Lots of options here. Many are simply adjusted by the Certified Installer and put away, others have external APPS that are used for set up, locked and not touched again. Many units in this category have DSP (digital signal processing) like time alignment. These tend to be very expensive and complex to set up.
  • EXTERNAL CROSSOVER: These units are mean to modify the signal after the source unit before it gets assigned to amplifiers. When you hear people talk about 2, 3, 4, 5 amplifier systems (and more) that are using several external crossovers. Again, very complex to set up for the DIY – better call you favorite Certified Installer.
Q: Can you gift wrap my purchase?
A:
No, sorry, we do not gift wrap.
! Email TEQ Support
Marine & Powersports
⇒ Tower Speakers & Compression Horns
Q: My tower speakers are pointing up or down and I would like them pointing straight forward. How can I do that?
A:
You need the swivel mount bracket. The bracket will allow you to tilt your enclosure up or down 180 degrees. These are packaged as “each” you will need to purchase two of them.

MB Quart swivel mount brackets are available in 3 different colors. The mount works with all MB Quart tower enclosures whether they are standard speakers, compression horns or 8 inch or 6.5 inch models.

Purchase a swivel mount bracket here:
White - http://mbquart.com/swvl-1w/
Dove Grey - http://mbquart.com/swvl-1g/
Black - http://mbquart.com/swvl-1b/
! Email TEQ Support
Polaris®
Q: I need help with my installation. Can I call someone with questions?
A:
Most likely no. The Polaris OFF-ROAD GRADE AUDIO by MB Quart product is specifically designed to be maintained by your Polaris dealer. If you purchased your product from Polaris.com, please consider contacting your dealer for installation and technical advice.

If, after full review of our on-line TEQ support, you feel that you have a product that you just need some help with, you may email our tech support team. After they have reviewed your comments, they will email you back some guidance. The turnaround time can be 24-48 hours depending on the number of questions in front of yours. Questions are answered Monday - Friday by a small team of industry professionals.

DIY
As you can read from the previous paragraph, audio equipment installations can be complicated. It is not always as simple as “just drop it in and wire it up”. Some projects really are designed for the “do it yourself” person with a bit of skill and a lot of common sense. Changing out a blown speaker, pretty simple, installing a sound bar, not really difficult. Just follow the manual, use the proper tools and as we have mentioned, consider a professional installer or technician at your Polaris dealer.
Q: My Polaris audio product was damaged and needs repairs; can I send it to you?
A:
No, we advise that you contact the dealer where you purchased the product or Polaris.com. They have a process to help you.

All Polaris “OFF-ROAD GRADE AUDIO by MB Quart is covered by a 1 year warranty but is only executed through the selling dealer.
Q: I would like to repair my own products, can I buy parts?
A:
No, we do not sell parts or provide schematics.
⇒ RZR
Q: Can I run LED Lights and audio equipment on my Machine?
A:
For RZR yes, we highly recommend you use the ultimate harness because it is pre-measured and fully waterproof. Here is a simple diagram that shows how the Ultimate Harness allows for LED light bars to be added as well as Extreme Audio Pods to be added to the rear.

Sound Bar Audio Pods

ULTIMATE HARNESS
Part # 2881617
2881617
⇒ Roof Audio Systems
Q: I purchased a Polaris Audio by MB Quart Roof System, what cables do I need?
A:
You only need the Busbar harness mentioned above. The roof is fully operational without any additional audio cables.

There is an additional JST connector and blue amplifier turn-on wire at the rear of the roof. This is used when you add something like Extreme Audio Pods, the Door Speakers amplifier or a RZR Subwoofer.

Check the section ADDING ADDITIONAL AUDIO.
Q: I have a roof, what is the blue wire and white jack’s purpose that hang from the back?
A:
The JST cable is the audio output to run the subwoofer or the Extreme Audio Pods. The blue wire is the turn-on wire for these additional audio components.

If you decide to run a Roof, the Subwoofer and the Extreme Audio Pods, you will need the “Y” adapter as well.

Check the section ADDING ADDITIONAL AUDIO.
Q: The roof audio system looks big, will it be difficult to install?
A:
No way, super simple. Just need a helper to help lift from the packaging and set into place on the roll cage.

The Roof Audio system is built around a composite infrastructure. This mean the roof is VERY light for its deceptive size. With a couple simple tools, you will have your roof installed in an hour or so. Here is a video showing how simple it is.

⇒ Source Units
Q: I’m just starting, where do I start? Which source unit should I choose?
A:
This answer depends on what you need when you are out riding? Do you need to pull in Radio stations? Do you just need to get music from your phone? Do you treat your machine like a submarine?

We offer several options, from Polaris’ Ride Command of powerful Sound Bars to small controllers that you can hide in the installation. Here are some quick points on each to help you decide.

  • Full Dash
  • AM/FM, USB, Bluetooth, Weather, Headset
  • Requires an amplifier and speakers
Ride Command

  • Small
  • Bluetooth only
  • Perfect for ATV installs
  • Discreet when you want to attract minimal attention to dash accessories
  • No radio
  • Requires an amplifier and speakers
Bluetooth Controller

  • All-In-One Solution
  • Bluetooth Source Unit, Amplifier and Speakers are all built-in
  • 4 speaker or 8 speaker version
  • Installs high in the roll cage to keep dash clear
  • Avoid heavy mud and water being higher in the machine
  • Bluetooth only
  • No radio
Sound Bar

  • All-In-One Solution
  • Bluetooth Source Unit with AM/FM, USB and 3.5mm input
  • Amplifier and Speakers are all built-in
  • 4, 8 and 10 speaker versions
  • Lightweight composite structure eliminates the “top heavy” issue with other roof audio systems
  • Avoid heavy mud and water being higher in the machine
Audio Roof
⇒ Bluetooth Controller
In Development...
⇒ RZR Dash Radio
In Development...
⇒ Sound Bars
Q: My Bluetooth connection on my sound bar seems disconnect sometimes. Why is that happening?
A:
We have found that in some situations, Soundbars are losing their connection to a previously paired device.

  • To fix this, disconnect power
  • Start vehicle; let it run for about 5 minutes
  • Apply power to the sound bar while vehicle is running
  • Re-pair your device to the soundbar
Q: I purchased a Polaris Audio by MB Quart sound bar 4 or sound bar 8, what cables do I need?
A:
Your machine will need the Busbar harness mentioned above installed for your power and ground.

Additionally, you will need either the speaker bar harness or the ultimate harness.

SPEAKER BAR HARNESS
Part # 2882280

You will use this harness for a soundbar installation only.

2882280

ULTIMATE HARNESS
Part # 2881617

You will use this harness for a full audio and lightning installation.

2881617
Q: I lost my mounting instructions for the sound bar, can you show me how the parts work?
A:
Of course, in the image here, you can see the controls on the front panel. In this illustration you can see the #5 bolt goes through the mounting bracket for the roll cage mount. Be sure to use the #6 gasket to assure you have a firm mount to your machine. The #4 bolt then secures the sound bar to the bracket. The left side is all the same.

SOUND BAR 4
Sound Bar 4

SOUND BAR 8
Aound Bar 8
Q: What is the color and pin out information for the Soundbar and Extreme Audio Pods?
A:
For you DIY champions, here is some secret information. If you do not know, exactly what you are looking, please consult your POLARIS dealer.

The Power/Ground hardness have the following colors:

  • ORANGE – Ignition switch. Connect to a (+) positive switched wire that powered on/off with the vehicle ignition switch.
  • RED – Constant battery power unusually connected at the buss bar.
  • BLACK – Ground, also connected to the buss bar.
  • BLUE – On the Soundbar4 and Soundbar 8, this is remote wire output “turn on” wire for additional audio equipment, like a subwoofer amplifier or Extreme Audio Pods, amplifier for door speakers, etc.

    When connecting Bluetooth controller to this connector on the Extreme Audio Pods, you will use this blue wire to “turn on” the Pods from the Bluetooth Controller.

Molex
Q: Can I add a subwoofer to my Sound Bar?
A:
Yes

Connect Sound Bar 8 Part #2881465 or Sound Bar 4 Part #2881230 to additional audio:
  • RZR Dash Amp (Part #2882122)
  • Extreme Audio Pods (Part #2881227)
  • Subwoofer (Part #2882063)
The harness #2882280 is missing the blue wire that tells the amplifier to turn on.

2882280

Polaris is aware of this issue and is revising the cable. If the cable you purchased on the blue wire separate, this ANSWER, does not apply to you system.

In the meantime, here is a work around...

Tools needed:
  • Length Of 18 gauge Blue Wire - (6 feet)
  • Red Barrel connector
  • Red male bullet connector
  • Wire Strippers
  • Side Cutters
  • Crimp Tool
Tools


Step 1: Locate the square Molex connector from the Sound Bar. The internal wire colors are black, red, orange and blue.

Step 2: We need to cut the blue wire, close to the plug.

Step 2

Step 3: Strip back a .25 inch piece of insulation off the blue wire from the sound bar.

Step 3

Step 4: Crimp the Red barrel connector onto that wire.

Step 4

Step 5: Cut .25 inch piece of insulation off the 6 foot blue wire.

Step 6: Insert both stripped cables into red barrel connector and crimp both sides.

Step 6

Step 7: Strip back a .25 inch piece of insulation off the other end of the 6 foot blue wire.

Step 8: Crimp the red male Bullet connector on the wire and connect to Female Bullet connector on amplifier.

Step 8

Step 9: The amplifier or subwoofer or Extreme Audio Pods will now turn-on when the sound bar is powered on.
Q: Can I add Extreme Audio Pods to my Sound Bar?
A:
Yes

Connect Sound Bar 8 Part #2881465 or Sound Bar 4 Part #2881230 to additional audio:
  • RZR Dash Amp (Part #2882122)
  • Extreme Audio Pods (Part #2881227)
  • Subwoofer (Part #2882063)
The harness #2882280 is missing the blue wire that tells the amplifier to turn on.

2882280

Polaris is aware of this issue and is revising the cable. If the cable you purchased on the blue wire separate, this ANSWER, does not apply to you system.

In the meantime, here is a work around...

Tools needed:
  • Length Of 18 gauge Blue Wire - (6 feet)
  • Red Barrel connector
  • Red male bullet connector
  • Wire Strippers
  • Side Cutters
  • Crimp Tool
Tools


Step 1: Locate the square Molex connector from the Sound Bar. The internal wire colors are black, red, orange and blue.

Step 2: We need to cut the blue wire, close to the plug.

Step 2

Step 3: Strip back a .25 inch piece of insulation off the blue wire from the sound bar.

Step 3

Step 4: Crimp the Red barrel connector onto that wire.

Step 4

Step 5: Cut .25 inch piece of insulation off the 6 foot blue wire.

Step 6: Insert both stripped cables into red barrel connector and crimp both sides.

Step 6

Step 7: Strip back a .25 inch piece of insulation off the other end of the 6 foot blue wire.

Step 8: Crimp the red male Bullet connector on the wire and connect to Female Bullet connector on amplifier.

Step 8

Step 9: The amplifier or subwoofer or Extreme Audio Pods will now turn-on when the sound bar is powered on.
Q: Can I add a RZR Dash Amp to my Sound Bar?
A:
Yes

Connect Sound Bar 8 Part #2881465 or Sound Bar 4 Part #2881230 to additional audio:
  • RZR Dash Amp (Part #2882122)
  • Extreme Audio Pods (Part #2881227)
  • Subwoofer (Part #2882063)
The harness #2882280 is missing the blue wire that tells the amplifier to turn on.

2882280

Polaris is aware of this issue and is revising the cable. If the cable you purchased on the blue wire separate, this ANSWER, does not apply to you system.

In the meantime, here is a work around...

Tools needed:
  • Length Of 18 gauge Blue Wire - (6 feet)
  • Red Barrel connector
  • Red male bullet connector
  • Wire Strippers
  • Side Cutters
  • Crimp Tool
Tools


Step 1: Locate the square Molex connector from the Sound Bar. The internal wire colors are black, red, orange and blue.

Step 2: We need to cut the blue wire, close to the plug.

Step 2

Step 3: Strip back a .25 inch piece of insulation off the blue wire from the sound bar.

Step 3

Step 4: Crimp the Red barrel connector onto that wire.

Step 4

Step 5: Cut .25 inch piece of insulation off the 6 foot blue wire.

Step 6: Insert both stripped cables into red barrel connector and crimp both sides.

Step 6

Step 7: Strip back a .25 inch piece of insulation off the other end of the 6 foot blue wire.

Step 8: Crimp the red male Bullet connector on the wire and connect to Female Bullet connector on amplifier.

Step 8

Step 9: The amplifier or subwoofer or Extreme Audio Pods will now turn-on when the sound bar is powered on.
⇒ Subwoofers
Q: I want to add the RZR subwoofer, will the Polaris cooler still fit?
A:
No, that is why we designed the subwoofer with Lock & Ride™. You can see in the picture the space that is utilized. You can remove it very quickly and put it back in after you move supplies to the camp site.

Lock & Ride
Q: My subwoofer seems very low in volume compared to the rest of my system, can I increase the volume?
A:
Yes, there are two adjustments to be aware of. First, there is a small rubber cover on the rear passenger side of the subwoofer. Gently remove that plug and insert a small regular screw driver to slowly raise the volume of only the subwoofer amplifier. Make this adjustment with all bass, treble, and EQ settings at zero and loudness “off”. You will want to play several pieces of music to get a good overall balance for all music you enjoy.

Adjust Volume Gain

Next, you will plug in the subwoofer “bass remote” and mount up front in the dash.

Bass Remote Mounting
Q: Can I add a subwoofer to my Sound Bar?
A:
Yes

Connect Sound Bar 8 Part #2881465 or Sound Bar 4 Part #2881230 to additional audio:
  • RZR Dash Amp (Part #2882122)
  • Extreme Audio Pods (Part #2881227)
  • Subwoofer (Part #2882063)
The harness #2882280 is missing the blue wire that tells the amplifier to turn on.

2882280

Polaris is aware of this issue and is revising the cable. If the cable you purchased on the blue wire separate, this ANSWER, does not apply to you system.

In the meantime, here is a work around...

Tools needed:
  • Length Of 18 gauge Blue Wire - (6 feet)
  • Red Barrel connector
  • Red male bullet connector
  • Wire Strippers
  • Side Cutters
  • Crimp Tool
Tools


Step 1: Locate the square Molex connector from the Sound Bar. The internal wire colors are black, red, orange and blue.

Step 2: We need to cut the blue wire, close to the plug.

Step 2

Step 3: Strip back a .25 inch piece of insulation off the blue wire from the sound bar.

Step 3

Step 4: Crimp the Red barrel connector onto that wire.

Step 4

Step 5: Cut .25 inch piece of insulation off the 6 foot blue wire.

Step 6: Insert both stripped cables into red barrel connector and crimp both sides.

Step 6

Step 7: Strip back a .25 inch piece of insulation off the other end of the 6 foot blue wire.

Step 8: Crimp the red male Bullet connector on the wire and connect to Female Bullet connector on amplifier.

Step 8

Step 9: The amplifier or subwoofer or Extreme Audio Pods will now turn-on when the sound bar is powered on.
⇒ Speakers
⇒ Extreme Audio Pods
Q: My extreme audio pods are so quiet I cannot hear them, can I adjust?
A:
Yes, this factory set volume is on purpose so you can balance the Extreme Audio Pods to the rest of the system. On the back of the Pod mounted on the passenger side is a small rubber plug. Remove it and insert a small regular screw driver into the round hole. Raise the volume of the Extreme Audio Pods until you are at about 75% of the rotation of the potentiometer. Make this adjustment with all bass, treble, and EQ settings at zero and loudness “off”. You will want to play several pieces of music to get a good overall balance for all music you enjoy. Make sure to re-insert the plug to keep the enclosure water tight.

Here is a video that shows the adjustment of the Extreme Audio Pods for the gain and the illumination.

Q: I want to change the illumination on my Extreme Audio Pods, how do I do that?
A:
You can remove the rubber plug on the back of the Pod mounted on the passenger side. Insert a small regular screw driver and click from red to blue or “off”. Make sure to re-insert the plug to keep the enclosure water tight.

Here is a video that shows the adjustment of the Extreme Audio Pods for the gain and the illumination.

Q: I bought the Ultimate Harness power and ground, what audio cable do I need?
A:
You should also have an “audio” cable. Which moves the audio signal from a Bluetooth controller, Sound Bar, RZR Radio, etc to the Extreme Audio Pods.

See Part # 2881652
Audio Harness
Q: I love these EXTREME AUDIO PODS – I want to run, TWO pairs, is that possible?
A:
Yes, you need a “Y” adapter and depending on where you are mounting the second set of Pods, you may also need a second JST Audio extension.

JST Audio “Y” adapter, Part # 2881651
Y Harness

JST Audio Extension, Part # 2881652
Audio Harness
Q: What is the color and pin out information for the Soundbar and Extreme Audio Pods?
A:
For you DIY champions, here is some secret information. If you do not know, exactly what you are looking, please consult your POLARIS dealer.

The Power/Ground hardness have the following colors:

  • ORANGE – Ignition switch. Connect to a (+) positive switched wire that powered on/off with the vehicle ignition switch.
  • RED – Constant battery power unusually connected at the buss bar.
  • BLACK – Ground, also connected to the buss bar.
  • BLUE – On the Soundbar4 and Soundbar 8, this is remote wire output “turn on” wire for additional audio equipment, like a subwoofer amplifier or Extreme Audio Pods, amplifier for door speakers, etc.

    When connecting Bluetooth controller to this connector on the Extreme Audio Pods, you will use this blue wire to “turn on” the Pods from the Bluetooth Controller.

Molex
Q: Can I add Extreme Audio Pods to my Sound Bar?
A:
Yes

Connect Sound Bar 8 Part #2881465 or Sound Bar 4 Part #2881230 to additional audio:
  • RZR Dash Amp (Part #2882122)
  • Extreme Audio Pods (Part #2881227)
  • Subwoofer (Part #2882063)
The harness #2882280 is missing the blue wire that tells the amplifier to turn on.

2882280

Polaris is aware of this issue and is revising the cable. If the cable you purchased on the blue wire separate, this ANSWER, does not apply to you system.

In the meantime, here is a work around...

Tools needed:
  • Length Of 18 gauge Blue Wire - (6 feet)
  • Red Barrel connector
  • Red male bullet connector
  • Wire Strippers
  • Side Cutters
  • Crimp Tool
Tools


Step 1: Locate the square Molex connector from the Sound Bar. The internal wire colors are black, red, orange and blue.

Step 2: We need to cut the blue wire, close to the plug.

Step 2

Step 3: Strip back a .25 inch piece of insulation off the blue wire from the sound bar.

Step 3

Step 4: Crimp the Red barrel connector onto that wire.

Step 4

Step 5: Cut .25 inch piece of insulation off the 6 foot blue wire.

Step 6: Insert both stripped cables into red barrel connector and crimp both sides.

Step 6

Step 7: Strip back a .25 inch piece of insulation off the other end of the 6 foot blue wire.

Step 8: Crimp the red male Bullet connector on the wire and connect to Female Bullet connector on amplifier.

Step 8

Step 9: The amplifier or subwoofer or Extreme Audio Pods will now turn-on when the sound bar is powered on.
⇒ Door Speakers
In Development...
⇒ Compact Amplifiers
⇒ RZR Dash Amp
Q: Can I add a RZR Dash Amp to my Sound Bar?
A:
Yes

Connect Sound Bar 8 Part #2881465 or Sound Bar 4 Part #2881230 to additional audio:
  • RZR Dash Amp (Part #2882122)
  • Extreme Audio Pods (Part #2881227)
  • Subwoofer (Part #2882063)
The harness #2882280 is missing the blue wire that tells the amplifier to turn on.

2882280

Polaris is aware of this issue and is revising the cable. If the cable you purchased on the blue wire separate, this ANSWER, does not apply to you system.

In the meantime, here is a work around...

Tools needed:
  • Length Of 18 gauge Blue Wire - (6 feet)
  • Red Barrel connector
  • Red male bullet connector
  • Wire Strippers
  • Side Cutters
  • Crimp Tool
Tools


Step 1: Locate the square Molex connector from the Sound Bar. The internal wire colors are black, red, orange and blue.

Step 2: We need to cut the blue wire, close to the plug.

Step 2

Step 3: Strip back a .25 inch piece of insulation off the blue wire from the sound bar.

Step 3

Step 4: Crimp the Red barrel connector onto that wire.

Step 4

Step 5: Cut .25 inch piece of insulation off the 6 foot blue wire.

Step 6: Insert both stripped cables into red barrel connector and crimp both sides.

Step 6

Step 7: Strip back a .25 inch piece of insulation off the other end of the 6 foot blue wire.

Step 8: Crimp the red male Bullet connector on the wire and connect to Female Bullet connector on amplifier.

Step 8

Step 9: The amplifier or subwoofer or Extreme Audio Pods will now turn-on when the sound bar is powered on.
⇒ Ranger
⇒ Ranger Audio System
Q: I have a Ranger, can I choose Polaris OFF-ROAD GRADE AUDIO by MB QUART?
A:
Yes, Ranger is a special machine and while much of what is available here does not fit Ranger, you have some great options.

First, you can choose the full Ranger Audio System. This includes the AM/FM Bluetooth source unit mounted in a replacement center console, a pair of perfectly engineered speakers and an antenna system. Here is a short video showing the features and benefits of the OFF-ROAD GRADE AUDIO system for Ranger by MB Quart.


Additionally, there is an INSTALLATION HIGHLIGHTS video here, and a FULL RANGER video of everything you might need.
Q: I have a Ranger, can I add more audio?
A:
Yes, you can add a pair of Extreme Audio Pods to the rear of your machine, with the speakers facing forward. It will require a special adapter from another company. The entire process is detailed in our QUARTER NOTE blog here.

Add more audio

Just a note, this installation requires that the Extreme Audio Pods play through the rear of the machine, if you have a full cab or have installed a rear piece of glass, this might not be the best solution for you.
Q: I have a Ranger without an audio system, can I add a sound bar?
A:
Yes, we created a special bracket 2882502 available from Polaris.
2882502
Remember, that a sound bar is the source unit, if you want to use the Ranger Audio system, you cannot also install a sound bar.

Here is a QUARTER NOTE blog showing one customer’s installation (with the sound bar and a pair of Extreme Audio Pods.

Sound Bar Install
⇒ Extreme Audio Pods
Q: My extreme audio pods are so quiet I cannot hear them, can I adjust?
A:
Yes, this factory set volume is on purpose so you can balance the Extreme Audio Pods to the rest of the system. On the back of the Pod mounted on the passenger side is a small rubber plug. Remove it and insert a small regular screw driver into the round hole. Raise the volume of the Extreme Audio Pods until you are at about 75% of the rotation of the potentiometer. Make this adjustment with all bass, treble, and EQ settings at zero and loudness “off”. You will want to play several pieces of music to get a good overall balance for all music you enjoy. Make sure to re-insert the plug to keep the enclosure water tight.

Here is a video that shows the adjustment of the Extreme Audio Pods for the gain and the illumination.

Q: I want to change the illumination on my Extreme Audio Pods, how do I do that?
A:
You can remove the rubber plug on the back of the Pod mounted on the passenger side. Insert a small regular screw driver and click from red to blue or “off”. Make sure to re-insert the plug to keep the enclosure water tight.

Here is a video that shows the adjustment of the Extreme Audio Pods for the gain and the illumination.

Q: I bought the Ultimate Harness power and ground, what audio cable do I need?
A:
You should also have an “audio” cable. Which moves the audio signal from a Bluetooth controller, Sound Bar, RZR Radio, etc to the Extreme Audio Pods.

See Part # 2881652
Audio Harness
Q: I love these EXTREME AUDIO PODS – I want to run, TWO pairs, is that possible?
A:
Yes, you need a “Y” adapter and depending on where you are mounting the second set of Pods, you may also need a second JST Audio extension.

JST Audio “Y” adapter, Part # 2881651
Y Harness

JST Audio Extension, Part # 2881652
Audio Harness
Q: What is the color and pin out information for the Soundbar and Extreme Audio Pods?
A:
For you DIY champions, here is some secret information. If you do not know, exactly what you are looking, please consult your POLARIS dealer.

The Power/Ground hardness have the following colors:

  • ORANGE – Ignition switch. Connect to a (+) positive switched wire that powered on/off with the vehicle ignition switch.
  • RED – Constant battery power unusually connected at the buss bar.
  • BLACK – Ground, also connected to the buss bar.
  • BLUE – On the Soundbar4 and Soundbar 8, this is remote wire output “turn on” wire for additional audio equipment, like a subwoofer amplifier or Extreme Audio Pods, amplifier for door speakers, etc.

    When connecting Bluetooth controller to this connector on the Extreme Audio Pods, you will use this blue wire to “turn on” the Pods from the Bluetooth Controller.

Molex
Q: Can I add Extreme Audio Pods to my Sound Bar?
A:
Yes

Connect Sound Bar 8 Part #2881465 or Sound Bar 4 Part #2881230 to additional audio:
  • RZR Dash Amp (Part #2882122)
  • Extreme Audio Pods (Part #2881227)
  • Subwoofer (Part #2882063)
The harness #2882280 is missing the blue wire that tells the amplifier to turn on.

2882280

Polaris is aware of this issue and is revising the cable. If the cable you purchased on the blue wire separate, this ANSWER, does not apply to you system.

In the meantime, here is a work around...

Tools needed:
  • Length Of 18 gauge Blue Wire - (6 feet)
  • Red Barrel connector
  • Red male bullet connector
  • Wire Strippers
  • Side Cutters
  • Crimp Tool
Tools


Step 1: Locate the square Molex connector from the Sound Bar. The internal wire colors are black, red, orange and blue.

Step 2: We need to cut the blue wire, close to the plug.

Step 2

Step 3: Strip back a .25 inch piece of insulation off the blue wire from the sound bar.

Step 3

Step 4: Crimp the Red barrel connector onto that wire.

Step 4

Step 5: Cut .25 inch piece of insulation off the 6 foot blue wire.

Step 6: Insert both stripped cables into red barrel connector and crimp both sides.

Step 6

Step 7: Strip back a .25 inch piece of insulation off the other end of the 6 foot blue wire.

Step 8: Crimp the red male Bullet connector on the wire and connect to Female Bullet connector on amplifier.

Step 8

Step 9: The amplifier or subwoofer or Extreme Audio Pods will now turn-on when the sound bar is powered on.
⇒ Bluetooth Controller
In Development...
⇒ Sportsman
Q: I have a Sportsman, can I add a sound bar?
A:
Yes, you need angle brackets or the Ranger brackets for a rear mount. Brackets are included with the sound bar.
Q: I have a Sportsman 1000, can I add audio?
A:
Yes, in a simple set up, choose the Bluetooth controller with the front or rear audio mounting bar to mount the Extreme Audio Pods. These parts are available from Polaris.

Sportsman

Rear Pipe is Part # 2881462

Front Pipe is Part # 2881461

Here is a video showing the Rear audio pipe working the all-weather testing of the Extreme Audio Pods.

⇒ Bluetooth Speaker
In Development...
⇒ Bluetooth Controller
In Development...
⇒ Extreme Audio Pods
Q: My extreme audio pods are so quiet I cannot hear them, can I adjust?
A:
Yes, this factory set volume is on purpose so you can balance the Extreme Audio Pods to the rest of the system. On the back of the Pod mounted on the passenger side is a small rubber plug. Remove it and insert a small regular screw driver into the round hole. Raise the volume of the Extreme Audio Pods until you are at about 75% of the rotation of the potentiometer. Make this adjustment with all bass, treble, and EQ settings at zero and loudness “off”. You will want to play several pieces of music to get a good overall balance for all music you enjoy. Make sure to re-insert the plug to keep the enclosure water tight.

Here is a video that shows the adjustment of the Extreme Audio Pods for the gain and the illumination.

Q: I want to change the illumination on my Extreme Audio Pods, how do I do that?
A:
You can remove the rubber plug on the back of the Pod mounted on the passenger side. Insert a small regular screw driver and click from red to blue or “off”. Make sure to re-insert the plug to keep the enclosure water tight.

Here is a video that shows the adjustment of the Extreme Audio Pods for the gain and the illumination.

Q: I bought the Ultimate Harness power and ground, what audio cable do I need?
A:
You should also have an “audio” cable. Which moves the audio signal from a Bluetooth controller, Sound Bar, RZR Radio, etc to the Extreme Audio Pods.

See Part # 2881652
Audio Harness
Q: I love these EXTREME AUDIO PODS – I want to run, TWO pairs, is that possible?
A:
Yes, you need a “Y” adapter and depending on where you are mounting the second set of Pods, you may also need a second JST Audio extension.

JST Audio “Y” adapter, Part # 2881651
Y Harness

JST Audio Extension, Part # 2881652
Audio Harness
Q: What is the color and pin out information for the Soundbar and Extreme Audio Pods?
A:
For you DIY champions, here is some secret information. If you do not know, exactly what you are looking, please consult your POLARIS dealer.

The Power/Ground hardness have the following colors:

  • ORANGE – Ignition switch. Connect to a (+) positive switched wire that powered on/off with the vehicle ignition switch.
  • RED – Constant battery power unusually connected at the buss bar.
  • BLACK – Ground, also connected to the buss bar.
  • BLUE – On the Soundbar4 and Soundbar 8, this is remote wire output “turn on” wire for additional audio equipment, like a subwoofer amplifier or Extreme Audio Pods, amplifier for door speakers, etc.

    When connecting Bluetooth controller to this connector on the Extreme Audio Pods, you will use this blue wire to “turn on” the Pods from the Bluetooth Controller.

Molex
Q: Can I add Extreme Audio Pods to my Sound Bar?
A:
Yes

Connect Sound Bar 8 Part #2881465 or Sound Bar 4 Part #2881230 to additional audio:
  • RZR Dash Amp (Part #2882122)
  • Extreme Audio Pods (Part #2881227)
  • Subwoofer (Part #2882063)
The harness #2882280 is missing the blue wire that tells the amplifier to turn on.

2882280

Polaris is aware of this issue and is revising the cable. If the cable you purchased on the blue wire separate, this ANSWER, does not apply to you system.

In the meantime, here is a work around...

Tools needed:
  • Length Of 18 gauge Blue Wire - (6 feet)
  • Red Barrel connector
  • Red male bullet connector
  • Wire Strippers
  • Side Cutters
  • Crimp Tool
Tools


Step 1: Locate the square Molex connector from the Sound Bar. The internal wire colors are black, red, orange and blue.

Step 2: We need to cut the blue wire, close to the plug.

Step 2

Step 3: Strip back a .25 inch piece of insulation off the blue wire from the sound bar.

Step 3

Step 4: Crimp the Red barrel connector onto that wire.

Step 4

Step 5: Cut .25 inch piece of insulation off the 6 foot blue wire.

Step 6: Insert both stripped cables into red barrel connector and crimp both sides.

Step 6

Step 7: Strip back a .25 inch piece of insulation off the other end of the 6 foot blue wire.

Step 8: Crimp the red male Bullet connector on the wire and connect to Female Bullet connector on amplifier.

Step 8

Step 9: The amplifier or subwoofer or Extreme Audio Pods will now turn-on when the sound bar is powered on.
⇒ General
⇒ Sound Bars
Q: My Bluetooth connection on my sound bar seems disconnect sometimes. Why is that happening?
A:
We have found that in some situations, Soundbars are losing their connection to a previously paired device.

  • To fix this, disconnect power
  • Start vehicle; let it run for about 5 minutes
  • Apply power to the sound bar while vehicle is running
  • Re-pair your device to the soundbar
Q: I purchased a Polaris Audio by MB Quart sound bar 4 or sound bar 8, what cables do I need?
A:
Your machine will need the Busbar harness mentioned above installed for your power and ground.

Additionally, you will need either the speaker bar harness or the ultimate harness.

SPEAKER BAR HARNESS
Part # 2882280

You will use this harness for a soundbar installation only.

2882280

ULTIMATE HARNESS
Part # 2881617

You will use this harness for a full audio and lightning installation.

2881617
Q: I lost my mounting instructions for the sound bar, can you show me how the parts work?
A:
Of course, in the image here, you can see the controls on the front panel. In this illustration you can see the #5 bolt goes through the mounting bracket for the roll cage mount. Be sure to use the #6 gasket to assure you have a firm mount to your machine. The #4 bolt then secures the sound bar to the bracket. The left side is all the same.

SOUND BAR 4
Sound Bar 4

SOUND BAR 8
Aound Bar 8
Q: What is the color and pin out information for the Soundbar and Extreme Audio Pods?
A:
For you DIY champions, here is some secret information. If you do not know, exactly what you are looking, please consult your POLARIS dealer.

The Power/Ground hardness have the following colors:

  • ORANGE – Ignition switch. Connect to a (+) positive switched wire that powered on/off with the vehicle ignition switch.
  • RED – Constant battery power unusually connected at the buss bar.
  • BLACK – Ground, also connected to the buss bar.
  • BLUE – On the Soundbar4 and Soundbar 8, this is remote wire output “turn on” wire for additional audio equipment, like a subwoofer amplifier or Extreme Audio Pods, amplifier for door speakers, etc.

    When connecting Bluetooth controller to this connector on the Extreme Audio Pods, you will use this blue wire to “turn on” the Pods from the Bluetooth Controller.

Molex
Q: Can I add a subwoofer to my Sound Bar?
A:
Yes

Connect Sound Bar 8 Part #2881465 or Sound Bar 4 Part #2881230 to additional audio:
  • RZR Dash Amp (Part #2882122)
  • Extreme Audio Pods (Part #2881227)
  • Subwoofer (Part #2882063)
The harness #2882280 is missing the blue wire that tells the amplifier to turn on.

2882280

Polaris is aware of this issue and is revising the cable. If the cable you purchased on the blue wire separate, this ANSWER, does not apply to you system.

In the meantime, here is a work around...

Tools needed:
  • Length Of 18 gauge Blue Wire - (6 feet)
  • Red Barrel connector
  • Red male bullet connector
  • Wire Strippers
  • Side Cutters
  • Crimp Tool
Tools


Step 1: Locate the square Molex connector from the Sound Bar. The internal wire colors are black, red, orange and blue.

Step 2: We need to cut the blue wire, close to the plug.

Step 2

Step 3: Strip back a .25 inch piece of insulation off the blue wire from the sound bar.

Step 3

Step 4: Crimp the Red barrel connector onto that wire.

Step 4

Step 5: Cut .25 inch piece of insulation off the 6 foot blue wire.

Step 6: Insert both stripped cables into red barrel connector and crimp both sides.

Step 6

Step 7: Strip back a .25 inch piece of insulation off the other end of the 6 foot blue wire.

Step 8: Crimp the red male Bullet connector on the wire and connect to Female Bullet connector on amplifier.

Step 8

Step 9: The amplifier or subwoofer or Extreme Audio Pods will now turn-on when the sound bar is powered on.
Q: Can I add Extreme Audio Pods to my Sound Bar?
A:
Yes

Connect Sound Bar 8 Part #2881465 or Sound Bar 4 Part #2881230 to additional audio:
  • RZR Dash Amp (Part #2882122)
  • Extreme Audio Pods (Part #2881227)
  • Subwoofer (Part #2882063)
The harness #2882280 is missing the blue wire that tells the amplifier to turn on.

2882280

Polaris is aware of this issue and is revising the cable. If the cable you purchased on the blue wire separate, this ANSWER, does not apply to you system.

In the meantime, here is a work around...

Tools needed:
  • Length Of 18 gauge Blue Wire - (6 feet)
  • Red Barrel connector
  • Red male bullet connector
  • Wire Strippers
  • Side Cutters
  • Crimp Tool
Tools


Step 1: Locate the square Molex connector from the Sound Bar. The internal wire colors are black, red, orange and blue.

Step 2: We need to cut the blue wire, close to the plug.

Step 2

Step 3: Strip back a .25 inch piece of insulation off the blue wire from the sound bar.

Step 3

Step 4: Crimp the Red barrel connector onto that wire.

Step 4

Step 5: Cut .25 inch piece of insulation off the 6 foot blue wire.

Step 6: Insert both stripped cables into red barrel connector and crimp both sides.

Step 6

Step 7: Strip back a .25 inch piece of insulation off the other end of the 6 foot blue wire.

Step 8: Crimp the red male Bullet connector on the wire and connect to Female Bullet connector on amplifier.

Step 8

Step 9: The amplifier or subwoofer or Extreme Audio Pods will now turn-on when the sound bar is powered on.
Q: Can I add a RZR Dash Amp to my Sound Bar?
A:
Yes

Connect Sound Bar 8 Part #2881465 or Sound Bar 4 Part #2881230 to additional audio:
  • RZR Dash Amp (Part #2882122)
  • Extreme Audio Pods (Part #2881227)
  • Subwoofer (Part #2882063)
The harness #2882280 is missing the blue wire that tells the amplifier to turn on.

2882280

Polaris is aware of this issue and is revising the cable. If the cable you purchased on the blue wire separate, this ANSWER, does not apply to you system.

In the meantime, here is a work around...

Tools needed:
  • Length Of 18 gauge Blue Wire - (6 feet)
  • Red Barrel connector
  • Red male bullet connector
  • Wire Strippers
  • Side Cutters
  • Crimp Tool
Tools


Step 1: Locate the square Molex connector from the Sound Bar. The internal wire colors are black, red, orange and blue.

Step 2: We need to cut the blue wire, close to the plug.

Step 2

Step 3: Strip back a .25 inch piece of insulation off the blue wire from the sound bar.

Step 3

Step 4: Crimp the Red barrel connector onto that wire.

Step 4

Step 5: Cut .25 inch piece of insulation off the 6 foot blue wire.

Step 6: Insert both stripped cables into red barrel connector and crimp both sides.

Step 6

Step 7: Strip back a .25 inch piece of insulation off the other end of the 6 foot blue wire.

Step 8: Crimp the red male Bullet connector on the wire and connect to Female Bullet connector on amplifier.

Step 8

Step 9: The amplifier or subwoofer or Extreme Audio Pods will now turn-on when the sound bar is powered on.
⇒ Bluetooth Controller
In Development...
⇒ Extreme Audio Pods
Q: My extreme audio pods are so quiet I cannot hear them, can I adjust?
A:
Yes, this factory set volume is on purpose so you can balance the Extreme Audio Pods to the rest of the system. On the back of the Pod mounted on the passenger side is a small rubber plug. Remove it and insert a small regular screw driver into the round hole. Raise the volume of the Extreme Audio Pods until you are at about 75% of the rotation of the potentiometer. Make this adjustment with all bass, treble, and EQ settings at zero and loudness “off”. You will want to play several pieces of music to get a good overall balance for all music you enjoy. Make sure to re-insert the plug to keep the enclosure water tight.

Here is a video that shows the adjustment of the Extreme Audio Pods for the gain and the illumination.

Q: I want to change the illumination on my Extreme Audio Pods, how do I do that?
A:
You can remove the rubber plug on the back of the Pod mounted on the passenger side. Insert a small regular screw driver and click from red to blue or “off”. Make sure to re-insert the plug to keep the enclosure water tight.

Here is a video that shows the adjustment of the Extreme Audio Pods for the gain and the illumination.

Q: I bought the Ultimate Harness power and ground, what audio cable do I need?
A:
You should also have an “audio” cable. Which moves the audio signal from a Bluetooth controller, Sound Bar, RZR Radio, etc to the Extreme Audio Pods.

See Part # 2881652
Audio Harness
Q: I love these EXTREME AUDIO PODS – I want to run, TWO pairs, is that possible?
A:
Yes, you need a “Y” adapter and depending on where you are mounting the second set of Pods, you may also need a second JST Audio extension.

JST Audio “Y” adapter, Part # 2881651
Y Harness

JST Audio Extension, Part # 2881652
Audio Harness
Q: What is the color and pin out information for the Soundbar and Extreme Audio Pods?
A:
For you DIY champions, here is some secret information. If you do not know, exactly what you are looking, please consult your POLARIS dealer.

The Power/Ground hardness have the following colors:

  • ORANGE – Ignition switch. Connect to a (+) positive switched wire that powered on/off with the vehicle ignition switch.
  • RED – Constant battery power unusually connected at the buss bar.
  • BLACK – Ground, also connected to the buss bar.
  • BLUE – On the Soundbar4 and Soundbar 8, this is remote wire output “turn on” wire for additional audio equipment, like a subwoofer amplifier or Extreme Audio Pods, amplifier for door speakers, etc.

    When connecting Bluetooth controller to this connector on the Extreme Audio Pods, you will use this blue wire to “turn on” the Pods from the Bluetooth Controller.

Molex
Q: Can I add Extreme Audio Pods to my Sound Bar?
A:
Yes

Connect Sound Bar 8 Part #2881465 or Sound Bar 4 Part #2881230 to additional audio:
  • RZR Dash Amp (Part #2882122)
  • Extreme Audio Pods (Part #2881227)
  • Subwoofer (Part #2882063)
The harness #2882280 is missing the blue wire that tells the amplifier to turn on.

2882280

Polaris is aware of this issue and is revising the cable. If the cable you purchased on the blue wire separate, this ANSWER, does not apply to you system.

In the meantime, here is a work around...

Tools needed:
  • Length Of 18 gauge Blue Wire - (6 feet)
  • Red Barrel connector
  • Red male bullet connector
  • Wire Strippers
  • Side Cutters
  • Crimp Tool
Tools


Step 1: Locate the square Molex connector from the Sound Bar. The internal wire colors are black, red, orange and blue.

Step 2: We need to cut the blue wire, close to the plug.

Step 2

Step 3: Strip back a .25 inch piece of insulation off the blue wire from the sound bar.

Step 3

Step 4: Crimp the Red barrel connector onto that wire.

Step 4

Step 5: Cut .25 inch piece of insulation off the 6 foot blue wire.

Step 6: Insert both stripped cables into red barrel connector and crimp both sides.

Step 6

Step 7: Strip back a .25 inch piece of insulation off the other end of the 6 foot blue wire.

Step 8: Crimp the red male Bullet connector on the wire and connect to Female Bullet connector on amplifier.

Step 8

Step 9: The amplifier or subwoofer or Extreme Audio Pods will now turn-on when the sound bar is powered on.
⇒ Harnesses & Connectors
Q: I have some non-Polaris Audio products already; can I incorporate them into my installation?
A:
Yes, there are two different cables you will need to consider to covert the white JST connector to standard RCA jacks. Review the “Quarter Note” blog for more information about choosing the correct connectors or adapters.

JSTMRCA2F - is a MALE JST and has FEMALE RCA adapters. Notice the connectors.
Buy Now - http://mbquart.com/jstmrca2f/

JSTMRCA2F

JSTFRCA2M - this is the FEMALE JST and has MALE RCA adapters.
Buy Now - http://mbquart.com/jstfrca2m/

JSTFRCA2M
Q: I just got my new Polaris Off-Road Grade Audio by MB Quart products. What cables do I need?
A:
When you purchase Polaris Off-Road Grade Audio by MB Quart, you may need some special cables for audio. Extensions, “Y” adapters, etc. We will outline those below.

The most important cable you will need in your installation is the Busbar cable. This will supply power to all the audio, lighting and other accessories that you will add to your machine of time. Using this Busbar harness prevents you from ever needing to connect any accessory to the battery.

This cable, available only from Polaris or your Polaris dealer, is often pre-installed by the dealer for your accessories, but you will need to confirm this.

The Polaris part # for a 2 seat machine is 2881646.

NEVER WIRE YOUR ACCESSORIES TO THE BATTERY – ONLY TO THE BUSS BAR
BUSS BAR

Here is a TEQ video with some details of the Buss Bar installation. The Busbar is critical for any audio, lightning or other accessories that you will need.

Q: I purchased a Deluxe Harness (2879865) from Polaris that is supposed to be for LED lights and audio. It does not plug into my soundbar or extreme audio pods. Why?
A:
This harness is the wrong harness for all Polaris Audio by MB Quart. ONLY use the Ultimate Harness.

WRONG
WRONG

CORRECT!
CORRECT
⇒ Ride Command
Q: I have a Ride Command, can I add Polaris Audio by MBQuart components to my system?
A:
Yes, you will be best to review the full Blog about the Ride Command connections and adapters on the MB Quart "Quarter Note" Blog.

There are two options for exporting the audio signal from Ride Command. First, you can convert from the Ride Command adapter to a Polaris JST connector which is designed to work with all MB Quart OFF-ROAD GRADE AUDIO equipment. The other option is to convert the Ride Command connector to a stereo (L-R) set of RCA jacks.

Ride Command to JST Female Connector – Adapts the custom Ride Command plug from the rear of the Polaris Ride command and adapts to a female Polaris JST connector to run audio signal “OUT” of Ride Command and “IN” to an amplifier, out to Extreme Audio Pods, or other OFF-ROAD GRADE AUDIO from MB Quart. Additionally, there is a blue power wire, also called a “turn-on” wire, which tells amplifiers, Extreme Audio Pods, or other audio components to turn “ON” when Ride Command is powered up.

This adapter DOES NOT support non-MB Quart audio product.
RC1-2JST-F

Ride Command to RCA Female Connector – Adapts the custom Ride Command plug from the rear of the Polaris Ride Command to a pair of female RCA connectors. This allows Ride Command to run audio signal “OUT” of Ride Command and “IN” to an amplifier, Extreme Audio Pods, or other OFF-ROAD GRADE AUDIO from MB Quart. Additionally, there is a blue power wire, also called a “turn-on” wire, which tells amplifiers, Extreme Audio Pods, or other audio components to turn “ON” when Ride Command is powered up.

This adapter CAN BE USED with any audio equipment that supports an audio “input” via RCA jacks.
RC1-2RCA-F
Q: I have a Ride Command and would like to add a sound bar, what cables do I need?
A:
None. You cannot and should attempt to add a sound bar to Ride Command. That would be like having two radios in the same car.

Ride Command acts as your command central. All audio components should be added “after” ride command by using the appropriate products and cables. Review the “Quarter Note” blog mentioned above.
⇒ Adding Additional Audio
Polaris OFF-ROAD GRADE AUDIO by MB QUART is made to be expandable. When you start with a sound bar or a Bluetooth controller or a Roof Audio system you can grow the system and the components step-by-step over time to add more sound and volume or add everything at once.

Consult with your Polaris dealer for a full understanding of what can fit your machine.

Q: I want to add more sound, what can I do?
A:
You need an output, which in Polaris is a JST audio cable. With access to this cable you can drive the audio signal to many components. Remember, the JST is only the audio portion. You will also need power, ground and turn-on cables for all components.

Here are some common upgrades:

Sound Bar Audio Pods
Q: I need to run Extreme Audio Pods and a Subwoofer from my roof audio, what do I need?
A:
You will need to split the JST connector 1 time or multiple times depending on how many additional audio products you will need to run. The “Y” adapter is available from Polaris.

Part # 2881651
Y Harness
Q: I have a 4 seat machine and need to run my JST cable a long distance. What do I need?
A:
You should also have an extension “audio” cable. Which moves the audio signal from a Ride Command, Bluetooth controller, Sound Bar, RZR Radio, Roof, etc to where you need it in the machine. The cable is available from Polaris.

See Part # 2881652
Audio Harness
⇒ "How to" Install Videos
Q: Do you have some “how to” install videos before I start my own installation?
A:
Yes we do. We try and provide as many options for all the Polaris vehicles as we can. Check back from time to time to see the newest additions.

Before you install any audio products, make sure that your machine has the Busbar harness installed for your machine. Some dealers install this harness before customer purchase, but, some do not. Watch the "How to" video under "BUS BAR HARNESS REQUIRED FOR ALL ACCESSORIES" in case you need to install your own.
Video: BUS BAR HARNESS REQUIRED FOR ALL ACCESSORIES
How to:
Video: POLARIS SPORTSMAN 570 BLUETOOTH SPEAKER, SPEEDO MOUNT
How to:
Video: POLARIS RZR, BLUETOOTH AUDIO REMOTE
How to:
Video: POLARIS RZR, EXTREME AUDIO PODS
How to:
Video: POLARIS RZR, SOUND BAR 8, PLUS EXTREME AUDIO PODS
How to:
Video: POLARIS RZR, BLUETOOTH CONTROLLER PLUS EXTREME AUDIO PODS
How to:
Video: POLARIS RZR, AUDIO ROOF INSTALLATION
How to:
Video: POLARIS RZR, SUBWOOFER
How to:
Video: POLARIS RANGER AUDIO INSTALLTION (Highlight)
How to:
Video: POLARIS RANGER AUDIO INSTALLTION (Full installation)
How to:
! Email TEQ Support
Maxxsonics Factory Specials
Maxxsonics Factory Specials